It’s time to think differently about the cost of your building, and the cost of your door. Statistics prove that for every $1 spent on purchasing for efficiency, the return will be $6 in energy savings — that equates to a 600% return on investment. Hydroswing® is only door investment that will bring that will make that fact a reality.
So do you think a bifold is a “good value” for you money? WRONG. In reality, the bifold has the highest total cost of ownership of all hangar doors. With a large number of moving parts, including straps, cables, motors, wires, limit switches, locks, chain, sprockets, carrier bearings, roller wheels, and more, there is a litany of service items. Bottom line: the bifold is ONLY less expensive on the front end, but it’s a maintenance hog that requires cost upkeep, and ongoing monitoring of the door and the building. The main problem is that cables stretch over time, and straps can over torque if limit switches fail. Without quarterly servicing, high cycling doors will have a very short life span.
The total cost of ownership (TCO) of your hangar or large door system should be evaluated in terms of the following: Total Cost New + Annual Service Costs + Life Span.
The cost of purchasing a bifold is just the “tip of the iceberg” in terms of expense.
An expense that is regularly overlooked is the impact cost of having to build a higher building to accommodate the “wedge” in the clear opening of the hangar to provide the required clear height. This bifold adjustment is (in many cases) 2 to 5 feet of extra all around linear height of building, not just at the door. Often builders need to uplift the whole linear height of the entire hangar. Your value decision needs careful consideration. General contractors and building companies are becoming aware of the inefficiencies and cost of the bifold and the door is being used less and less in their competitive bidding process.
When calculating your TCO, choosing a hydraulic single panel door system reduces overall building height, maximizes opening height and width, reduces part counts by up to 95%, reduces servicing costs to almost zero, and delivers a door system which will last the full life of the building. It’s all about quality up front and life and durability of your door. To make a sound investment, avoid a non-engineered, unproven cable replacement offers from bifold manufacturers, call Hydroswing® to retrofit your hangar. Don’t put a short term fix on a long term problem. The Hydroswing® hydraulic single panel door system is the most cost effective purchase for your hangar and the most bang for your buck on your TCO. Get it right the first time. Be the King ... Fit a Hydroswing®… for life!
Remember… If it doesn’t come from Hydroswing® — It’s not a Hydroswing®!
Hydroswing® has always been synonymous with innovation. One of the many things that sets the Hydroswing® Hydraulic Door apart from the rest is our ability to completely customize our product, right down to cladding on the door. Enter the “glass Hydroswing®,” one of our most famous doors located at the McClellan–Palomar Airport in Carlsbad, California.
This masterpiece was designed and manufactured to replace a fabric door on one of the airport’s private hangars. Constructed with several tons of laminated glass, this magnificent door was built to showcase the aircraft displayed behind this 100% glass covered 63 ft. x 18 ft. single panel hydraulic door. Visually breathtaking, this glass door is just the tip of the iceberg as to what Hydroswing can do. This dramatic display would never have been possible with a bifold, fabric or roll up door. Click here to watch the door in action!
This unique door is pre hung in its own S257 steel frame is built to ISO 9001 standards and American Welding Society D1.1 certified. The steel is shot blasted and primed in Carboline Primer 890 which is a highly chemical resistant epoxy mastic coating that is abrasion resistant. In addition, this door is constructed with Hydroswing’s own patented bow truss ensuring strength and stability. To round out the perfection of this hydraulic glass door is Hydroswing’s use of premium lines, hoses and connectors.
The Hydroswing® hydraulic door can be clad to match the thermal characteristics of any building, or can be created or adapted to almost any design idea. Your hangar door can seamlessly blend to your existing building, or make a powerful statement with custom cladding. The Hydroswing is effective, safe, and can be manufactured in sizes up to 150’(45.0 m) wide X 40’(12.0 m) high. Our hydraulic door can be retrofitted to everything from commercial aviation facilities to private airplane and helicopter hangars.
Simplicity, strength, ease of use and reduction in moving parts, plus use of customized cladding are among the top reasons customers are making the switch to Hydroswing®. The Hydroswing® team has the “out-of-the-box” thinking it takes achieve lofty door goals. Once again, Hydroswing’s simple and efficient one-piece design is the only choice for the most innovative of applications.