The Strength of a Hydroswing Hydraulic Door

Hurricane season is here. Hydroswing’s phone lines are lighting up as customers from severe weather zones begin to prepare. Customer after customer tells the tale of lesser doors on their own hangars and structures that turn to rubble, while neighbors with a Hydroswing® Door stood steady and strong. We’ve heard reports of bits and pieces of bifold doors on the ground at the end of the storm, while the Hydroswing® on the property remained virtually unaffected. 

 

 According to a report on risks of hurricane damage by Johns Hopkins University, “In a hurricane, gusts of wind can be expected to be 25% to 50% higher than the sustained wind velocity. Thus, a hurricane with sustained winds of 150 mph may produce gusts exceeding 200 mph. The effect of a storm's wind is best evaluated in terms of the pressure it exerts. Pressure varies with the square of the velocity, meaning that pressures increases very rapidly with increasing wind velocity. For example, a 100 mph wind exerts a pressure of about 40 pounds per square foot on a flat surface, while a 190 mph wind would exert a force of 122 pounds per square foot. As an example, in a 100 mph wind, a 4x8 sheet of plywood would be thrown by up to 1100 pounds of force.” 

Building owners need to be ready, and with a Hydroswing® you’ve got a better chance to protect your investments. Today, with budgets tight, it’s more important than ever to take every precaution to make your building structurally sound. Statistics prove approximately 80% of hurricane wind damage initiates with wind entry through the largest opening of a structure. This means that securing that opening greatly increases the chances of the survival of that structure – and the protection of its contents. According to the same study, “Garage door failure was a significant cause of damage during past hurricanes. The most common failure was deflection of the garage door from wind pressure until the tracks rotated and the door rollers separated from the tracks. Loss of doors resulted in envelope breach and a sudden increase in internal pressure.” This same theory will hold true for your hangar or warehouse door that is on rollers. With no rollers to consider, and single panel construction, the Hydroswing® is a must in hard weather and wind locations.

 After witnessing Hydroswing superiority (up to 200 MPH wind loading) for themselves, many weather-wary Gulf Coast residents are trading up to Hydroswing as well. If you’re an existing Hydroswing customer, you can rest easy knowing that when this severe weather season is over, you and your investments will remain safe and protected behind the sturdiest, most secure door system on the market... and if you’re not... make the move to replace now, or you may regret it later.

 

 

 

 

The “Sustainable” Single Panel Hydraulic Door System

Sustainable means “pertaining to a system that maintains its own viability by using techniques that allow for continual reuse.” By replacing bifold or roller shutter doors with a Hydroswing® single panel agricultural door on your equipment and/or process buildings, you will probably never have to replace the door again. Hydroswing® is a sustainable solution to all your door needs.


The simplicity of a single panel hydraulic door compared to bifold and roller shutter doors changes face of agricultural buildings. With a Hydroswing®, (complete in its own frame, pre hung, ready to go “pillar to pillar” and right to the header), the wider you go, the better value it becomes. Safe and easy-to-use, the Hydroswing® provides almost zero in life service costs and therefore a guaranteed return on your investment. 

 

When farmers, ranchers and biomass producers consider the potential for door replacement in their older buildings, more and more they are turning to the single panel hydraulic door solution. With internal personnel doors, wind loadings to cope with forces of 200 MPH and strength to keep valuable machinery locked in and secure, the Hydroswing® offers the most attractive and cost effective source in the marketplace today. (Financing made easier than ever through our new equipment leasing program. ) For tractor security, plant and machinery security, Hydroswing® is the only choice for farm, biomass fuel, industrial and grain storage building doors.

 

 The difference is clear to see in the photo above, where one of three buildings has had two roller shutter doors replaced by one efficient, single panel hydraulic door. This addition adds door size, value, and in some instances, may allow you to use old buildings in ways previously not thought possible without constructing a new building. Concentrating on what you do with your building or shed is more important to your bottom line than replacing a door every two or three years.


The Hydroswing® will not pop out of its rails, rust away, flap in the wind, or allow pigeons or other birds in via the roller. With 70% less moving parts than a bifold, the Hydroswing® seals all the way round its own frame, and if required for food regulations, can be made 100% rodent proof. 

 Add value, size and efficiency by replacing your warn out or dangerous bifold or roller shutter doors to your biomass fuel store, grain store or agricultural buildings with a Hydroswing®. Sustain your door for years to come. Buy or lease a Hydroswing today.

 

 

 

Introducing Hydroswing® Leasing -The Best and Original Hydroswing® Hydraulic Door Can now be Leased as Equipment

It’s no secret that equipment leasing is a leading choice for the agriculture, aviation and industrial sectors.  With equipment being the mainstay, owners have looked to leasing to help the cash flow crunch while allowing them to quickly acquire the latest technology. Since 1960 private fixed investment in equipment increased from $29.7 billion to almost $1 trillion in 2012. In 2013, that number continued to rise. Nonetheless, the economy has made it difficult for businesses to part with cash, even though they are in need of new equipment. Leasing solves that problem. And now Hydroswing® enters the arena and expands the possibilities across all sectors. A door is no longer a door. Thanks to Hydroswing® Leasing, any hydraulic door we manufacture can be considered a piece of working capital equipment.

 

In agriculture alone, leasing of equipment exceeds $6 billion in annual volume in the United States. In aviation, approximately 30% of the world’s aircraft are leased, and that number continues to increase. Leasing works and Hydroswing® is on board. Hydroswing® Leasing is the first program of its kind to offer hydraulic doors as equipment: No money down, low payments ($49.99 per week) and a $1.00 buyout at the end of the lease. There will always be more old buildings than new, and with a Hydroswing® lease, it’s easier than ever to replace your obsolete door system and enjoy the efficiency and advanced technology of the original Hydroswing® hydraulic door. 

 Leasing a door is not as complicated as it seems. It’s a painless process that preserve your line of credit, let you keep your cash flow in place and can immediately add value to your business.  In addition, lessees can take an immediate write-off of dollars spent rather than waiting for equipment or storage facilities to depreciate over several years. You’ll also have the option of deduction 100% of your lease payment as a business expense. To make the package complete, a Hydroswing® lease allows for opportunity to eliminate or minimize shipping and install costs. It’s a “win win” all the way around.

 

 Hydroswing® Leasing is a game changer for industry. Hydroswing® has over 7,000 doors in use and is being manufactured in ISO 9001 approved global manufacturing plants worldwide. Hydraulics are the most effective door choice. The advantages: Less than 70% of the moving parts of the bifold door and 50% less moving parts than sectional, bottom rolling, or top hung doors with 95% less maintenance costs. The Hydroswing® easily retro fits to replace the bi-fold, bottom rolling, top hung, sectional or fabric doors, and is ideal for new builds, steel, post and frame or block structure. Now everything is possible with a Hydroswing® door.

 

Ordinary to Extraordinary - Architectural Hydraulic Doors

Architecture is constantly evolving… The trend in contemporary architectural design is to unite indoor and outdoor living spaces. With hydraulics in play, the functionality of doors and walls completely changes.  The Hydroswing® single panel hydraulic door system has become a blank canvas for the adventurous architects who specialize in high profile homes, commercial buildings and other special applications. In the past, architects were limited by how doors and walls function, but now the possibilities are endless. Walls up to 150' (45m) wide and 40' (12m) tall can be converted into artistic, useful and cost effective hydraulic doors that can create a unique and completely functional indoor/outdoor experience. With almost 100% seal-ability, design dynamics with a Hydroswing® hydraulic door are revolutionizing the way architects can create buildings and homes.  

Think of what can happen when walls become doors and doors become walls. Architectural problems can be solved and boundaries can be moved. Innovative design can be incorporated into existing structures (or new builds) and the overall schematics of outside walls can expand. The Hydroswing® for architecture can be built to totally change anything from a single wall (or door) in a custom home to an entire commercial building. Where sliding windows and bifolds used to be standard for restaurants with outside patios, hydraulic doors can now be used to enhance light, maximize space, and will revolutionize the way architects include outdoor environments in the scope of their design. With the touch of button, the single panel door can transform hotels, stadiums, bars, restaurants, garages, homes and any other kind of structure that wants to “move a wall.” The added bonus: With the door in an “up” position, shade and protection are immediately created.  

The simplicity and safety of the hydraulic door removes the need for cables and counter weights used in so many ambitious architectural projects and curved facades. The Hydroswing® isn’t a “knock off” of an agricultural door – ours is the original and most sophisticated design on the market today. Engineered for performance and precision, the door can be easily installed to match building profiles with glass, wood, or heavy and ornate finishes. Hydroswing® doors lift easily and quietly with ease from the power of the hydraulic single panel door system. We can customize any installation and the sky’s the limit in terms of design. Our hydraulic cylinders can be powder coated or chromed to match or complement the interior door colors to seamlessly connect indoor and outdoor spaces.   

Hydroswing® is the industry expert in silently and effortlessly moving structures, and we offer a new frontier for imaginative and leading edge architects around the globe.