Sustainable means “pertaining to a system that maintains its own viability by using techniques that allow for continual reuse.” By replacing bifold or roller shutter doors with a Hydroswing® single panel agricultural door on your equipment and/or process buildings, you will probably never have to replace the door again. Hydroswing® is a sustainable solution to all your door needs.
The simplicity of a single panel hydraulic door compared to bifold and roller shutter doors changes face of agricultural buildings. With a Hydroswing®, (complete in its own frame, pre hung, ready to go “pillar to pillar” and right to the header), the wider you go, the better value it becomes. Safe and easy-to-use, the Hydroswing® provides almost zero in life service costs and therefore a guaranteed return on your investment.
When farmers, ranchers and biomass producers consider the potential for door replacement in their older buildings, more and more they are turning to the single panel hydraulic door solution. With internal personnel doors, wind loadings to cope with forces of 200 MPH and strength to keep valuable machinery locked in and secure, the Hydroswing® offers the most attractive and cost effective source in the marketplace today. (Financing made easier than ever through our new equipment leasing program. ) For tractor security, plant and machinery security, Hydroswing® is the only choice for farm, biomass fuel, industrial and grain storage building doors.
The difference is clear to see in the photo above, where one of three buildings has had two roller shutter doors replaced by one efficient, single panel hydraulic door. This addition adds door size, value, and in some instances, may allow you to use old buildings in ways previously not thought possible without constructing a new building. Concentrating on what you do with your building or shed is more important to your bottom line than replacing a door every two or three years.
The Hydroswing® will not pop out of its rails, rust away, flap in the wind, or allow pigeons or other birds in via the roller. With 70% less moving parts than a bifold, the Hydroswing® seals all the way round its own frame, and if required for food regulations, can be made 100% rodent proof.
Add value, size and efficiency by replacing your warn out or dangerous bifold or roller shutter doors to your biomass fuel store, grain store or agricultural buildings with a Hydroswing®. Sustain your door for years to come. Buy or lease a Hydroswing today.
A couple of centuries ago, 90% of the population in the United States lived on farms and produced food. Today, farmers who produce cereals, fruits, vegetables, meat and dairy, only make up 2% of the population and still provide to the masses. To keep up with this ever growing demand, agriculture has turned to modern machinery and technology. In 1940, the data shows that one farmer could feed 19 people. By 2010, that number had increased to 155 people. Changes in equipment, biotech breakthroughs for crop production, and modified barns and storage facilities have allowed for vast improvements throughout the industry.
The bottom line: Farms are growing in size because of increased efficiency, and hydraulic doors are playing a huge role. Hydroswing® is playing a huge role. It’s important for all farmers to keep their valuable machinery locked in and secure, and the Hydroswing® single panel hydraulic door is the best choice. The Hydroswing® is operated by two dual-acting hydraulic rams powered by a single or three-phase motor and pump. This in itself provides an extra layer of safety because the Hydrowswing® is impossible to operate without access to the control unit, making it far more secure than other types of doors. And, with almost 100% seal-ability, our door can be easily retrofitted to existing buildings or fitted to new builds for the ultimate in efficiency for all agricultural building or shop doors.
What’s on your farm? Bi-folds? Roller doors? Sliders? Unlike those, the Hydroswing® will not pop out of its rails, rust away, flap in the wind, or allow birds to fly in via the gaps around the door slabs. The Hydroswing® seals all the way around its own frame and if required for food regulations, can be made 100% varmint/bird proof. With Hydroswing, there is freedom to “open end” or “open side” any building, providing unrestricted loading and maneuvering for composting, silage, grain storage, feed/transfer sheds/buildings and farm shops. The overhead clearance also allows for multiple load discharge saving valuable supplier transport time between loads… all going straight to your bottom line and ROI on your investment in the Hydroswing® single panel hydraulic door system.
If you have special coverings/sheeting and sealing requirements, the simplicity and strength of a Hydroswing® allow you to have the door covered in the same as the walls maintaining insulation levels for better efficiency and cost effectiveness over cold winters.
Step into the future of efficiency with Hydroswing®. Our doors can be fitted to post and frame , pole barns, stick, steel (PEB), tensile, Quonset, brick and block structures with little or no alteration to an existing building for retro fit or total simplicity when designing your new building to receive the totally “pre hung” Hydroswing®.
Post frame construction has its deep roots in agriculture. This kind of building came to prominence in the 1930s. Poles (usually telephone poles which in turn lead to the name “pole barn”) were sunk into the ground and steel roofing and siding was put into place to complete the structure. This was a short list for foundational material and it simplified the barn construction process. The telephone poles were later replaced by chemically treated sawn posts, then metal plates were introduced that connected the trusses and roof spans began to increase. Later, laminated posts made the scene and all the buildings were able to go taller as well. Today, post frame construction is still extremely efficient and is used worldwide for an array of projects, and remains the leading choice for agricultural and storage buildings.
There are a number of door choices that go hand-in-hand with post frame construction, but if you consider maximum opening dimension, least impact on building, maximum strength and sealability, lowest in service life costs, reliability, massively reduced moving parts and greater safety as the driving criteria... the single panel hydraulic door system will make the most sense. The agriculture and farming industry revolves heavily around hydraulics, so it’s easy to see why the Hydroswing® has become the premier door for farm machinery sheds big and small.
The post frame build can vary tremendously depending on the size and scope of the end structure. Hydroswing® can fit and/or retro fit almost any pole barn or post frame building with doors as large as 40' tall to 150' wide. If you need reduced building height/cost WITHOUT reduced door opening dimension, reduced part count in the structural mechanism of the door (no pulleys of any kind), integral pre hung frame with little dependence on building structure for strength, the ability to clad with more options than simply a 28 gauge steel sheet, have the same thermal properties as the building walls, almost 100% sealability to frame, self install simplicity, little or no in life service costs and lifelong reliability, as well as limitless window and man door options… then Hydroswing® is your answer. And, the Hydroswing® door is a perfect solution for replacing slider doors and roller doors. You can also enlarge your existing opening by replacing an inefficient bi-fold door.
Pre engineered metal buildings (PEB’s) have also been prominent in agricultural settings. The structures originally became popular during World War II for barracks and maintenance facilities that required no welding and could be bolted-up for simple construction. After the war, the industry continued to blossom. With the power of computer aided design (CAD), today’s metal buildings can be applied to almost any non-residential use. The Hydroswing® fits easily into new construction or is the ideal choice for replacing an outdated or beyond economic repair door such as a bifold, slider or top hung.
The concept behind Hydroswing’s strong, single-panel, hydraulic design was born and bred by the demand for a more efficient door from the farmers and ranchers in the rural area. Hydroswing® quickly became the door of choice for savvy ag industry professionals across the country. Although the Hydroswing phenomenon now reaches across a variety of industries, the agricultural customer remains the backbone of the business. Hydroswing® doors are engineered specifically to provide a cost-effective solution to meet the demands of the agricultural industry. Hydroswing® delivers strength, efficiency and reliability, utilizing the same hydraulic technology that you use on your heavy equipment every day to get the job done. Why would you trust anything less for your doors?
There was a time when oxen and horses were used for power, basic wooden plows tilled the fields, all sowing was done by hand, cultivating was done by hoe, and hay and grain was cut with sickles. By 1837, John Deere and Leonard Andrus began manufacturing steel plows and a practical threshing machine was patented. The first gasoline tractor was built by John Froelich 1892 and the first commercially successful (gasoline-powered) general purpose tractor in was in production.
From 1920-1940, farm production made large strides. The use of mechanized power expanded and by the 50’s the number of tractors on farms finally exceeded the number horses and mules for the first time. The 60’s saw 96% of cotton harvested mechanically, and the 70’s and 80’s brought self-propelled combines, and more efficient equipment. By the 90’s, farmers were using satellite technology to track and plan their farming practices. The new millennium has advanced agricultural technology to an even further by introducing smart phones, tablets and portable computers to the cabs of tractors, trucks and combines. It’s a new world for farmers.
Over the past century, agriculture has been strongly influenced by enhanced mechanization, but even more so by how humans operate those machines. Though the fundamentals of agricultural machinery are basically the same, the technology, size, scope and capabilities have evolved dramatically. Keeping pace with the changes is how farmers “house” their equipment. Over the last decade the single panel hydraulic agricultural door has become the “door of choice” for farmers across the country. Doors for agriculture machine sheds and doors for barns are transitioning from roller, slider and bi-fold doors towards the superior technology of the hydraulic door.
Strong and well sealed, the hydraulic door is easy to install on pole barns, post & frame buildings and pre engineered steel buildings. The Hydroswing® agricultural door can be found on thousands of farms across the country and is taking its place among the farming world’s technological advances. Hydroswing hydraulic doors are also an easy way for farmers to enlarge existing openings in sheds and barns.
Door markets in the United States are keeping pace with modern technology and have started to move toward efficiency and “in life” service cost. Reduced pricing and quality workmanship are quickly making hydraulic doors one of the many advances that simplify and improve agriculture.