Everything you need to know about Hydraulic Doors for Aviation, Agriculture, Industrial & Architectural use

Hydroswing’s Big Doors – Manufacturing Masterpieces


Until Hydroswing, it was hardly conceivable to think of a hydraulic door larger than 100’ (30m), but times they are a changing!  Hydroswing is ramping up the pace and manufacturing and selling big door after big door… up to 150’ (45m) wide and 40’ (12m) tall! Hydroswing® has broken the size barrier and is charging into the large commercial door and industrial door market. 

These gigantic manufacturing masterpieces are creating a revolution in terms of construction possibilities. Total simplicity, sheer strength, ease of use and reduction in moving parts, plus the use of specialty cladding (which makes the door match the thermal characteristics of the building) are among the top reasons customers are looking to Hydroswing® for their big door needs. The sophistication of large single panel hydraulic doors is now part of everyday door use across every sector. In addition to new doors on new buildings, we are also retrofitting gigantic openings and moving walls. With Hydroswing®, very large walls can be converted into useful and cost effective hydraulic doors. With almost 100% seal-ability, this conversion will forever change the face of commercial and industrial structures around the world.

 

 Before the option of Hydroswing’s large and extra-large singe panel hydraulic doors, openings were restricted. Structures with massive needs had to rely on steel rolling doors or sectional applications. The option of a single panel hydraulic door changed everything. The huge opening capacity, teamed with expanded vertical clearance and an almost air-tight seal, the door essentially becomes another wall. In turn, the enhanced building efficiency reduces both costs across the board.  

Hydroswing® is synonymous with quality. From the beginning, our standards have been the highest in the industry.  All Hydroswing® doors are fabricated in ISO 9001 facilities that adhere to the American Welding Society (AWS) D1.1 code requirements for welding of structural steel. Unlike other manufacturers, we understand the importance of working within specific codes and with vendors who boast an ISO certification.

 

Hydroswing® is overcoming space and size hurdles in the commercial and industrial sectors at a rapid pace. New projects in the works include a “door within a door” allowing for a smaller single panel installation within the confines of a 150’ (45m) main door allowing a wide array of multi-use possibilities. Hydroswing® is single handedly changing the way people use doors in commercial and industrial settings. Our ability to design and create solutions for large industrial doors and large commercial doors will leave a lasting impact on productivity, efficiency and cost effectiveness for any buyer.

 

 

 

 

Hydroswing – Versatile by Design

Versatile is defined as “being capable of or adapted for many different uses.” Versatile can also be defined as Hydroswing®.  After years of research, innovation and progress, Hydroswing has swept the hydraulic door market. There is no limit to what we can do. The Hydroswing® door system adds strength where others cannot, adds reliability where others are unable, provides superior headroom, precision workmanship, strength and reliability when it counts. Our sizing selection offers options and versatility that other systems can’t and we hit the target 100% of the time.


The “Small” Hydroswing®


Our “small” Hydroswing® hydraulic door is considered any door under 35 feet (10.66m) in width. Our small doors have been widely used for T-hangars, box hangars and at small airparks. Also ideal for storage of all kinds, including farms and ranches, or the residential user.  Think custom garage, shed, workshop, small feed storage, movable walls and more.

 

 

The “Medium” Hydroswing®


Our “medium” Hydroswing® hydraulic door is considered any door that measures 35 feet (10.66m) to 65 feet (19.81m).  Ideal for airplane or helicopter hangars, machine shops, grain and feed storage, biomass, and more.

 

 

The “Large” Hydroswing®


Our “large” Hydroswing® hydraulic door is considered any door that measures 65 feet (19.81m) to 95 feet (28.95m). We are true specialists in the large and extra-large and XXL door markets. This is our most popular door for commercial aviation and specialty use. Think all areas of industry including mining, agriculture and aviation.

 

The “Extra Large” Hydroswing®


Our “extra-large” Hydroswing® hydraulic door is considered any door that measures 95 feet (28.95m) to 119 feet (36.27m). We manufacture a hydraulic door that is strong, efficient and tested for quality assurance. The Hydroswing® is being used around the world on commercial buildings, commercial aviation hangars, specialty and other industrial uses.

 

The “XXL” Hydroswing®


Our “XXL” jumbo Hydroswing® hydraulic door is considered any door that measures over 120 feet (36.57m). It takes a specific knowledge to manufacture a door of this magnitude and we are proud to have these doors in use worldwide.

 

The Hydroswing® single panel hydraulic door system delivers on all criteria – strength, adaptability, seal-ability, wind loading, and expanded headroom. Size is never an issue for Hydroswing and we do it all with 70% less moving parts than a traditional bifold door. We boast a higher degree of safety since our doors have no rails or pulleys. Hydroswing® is also 100% more secure than fabric and has been tested to 200 mph in wind load testing. Our doors our manufactured to ISO 9001/ American Welding Society D1.1 standards.

Any size, any place…Hydroswing® is THE large door system of choice around the world.

 

 

 

 

 

 

 

 

ISO 9001/ AWS D1.1 – Because Quality Matters

Hydroswing® is synonymous with quality. From the beginning, our standards have been the highest in the industry.  All Hydroswing® doors are fabricated in ISO 9001 facilities that adhere to the American Welding Society (AWS) D1.1 code requirements for welding of structural steel. Unlike other manufacturers, we understand the importance of working within specific codes and with vendors who boast an ISO certification. ISO (International Organization for Standardization) is the largest developer in the world of voluntary International Standards.  An independent and non-governmental membership organization at work in 165 countries, ISO began in London in 1946 with a goal to “facilitate the international coordination and unification of industrial standards.” Today, ISO has published over 19,500 International Standards covering almost all of manufacturing and technology.

 

 ISO 9001 is part of the ISO 9000 “family of quality management systems standards” designed to help manufacturers meet statutory and regulatory requirements related to a product.  A third party certification provides an “independent confirmation” that companies meet the requirements of ISO 9001. So what does the mean for Hydroswing® customers? It means we are confident in our selected vendors and we pass that quality to our end users.  The ISO 9001 facilities we work with have Quality Management Systems (QMS) in place and are stringently audited for welding and quality assurance. The hydraulic components are sourced centrally in the United States for further continuous quality and supply chain integrity.

 

At Hydroswing®, fabrication quality is just one area we set ourselves apart from others. Our welding is always to AWS D1.1 code which covers the requirements for “any type of welded structure made from the commonly used carbon and low-alloy constructional steels.”  Another example of our quality systems is our shot blasting pre-paint. This ensures the perfect base for the application of Carboline carboguard 890, a highly chemical-resistant epoxy mastic coating that adds 50% greater corrosion resistance than any other hydraulic door offered in this category. Shot blasting allows an added layer of inspection of the steel for rare imperfections which remain unseen in non shot blasted door systems.

 

 The quality control doesn't stop there!  Our patented Hydroswing® bow truss (US D584,831S) is unique in the industry and use only premium hydraulic lines, hoses and connectors. To make our standards complete, we also use only UL certified controls motors and pumps.  It’s all about quality. It’s Hydroswing. For more information about ISO and ISO 9001 certification, visit www.iso.org 

The “Sustainable” Single Panel Hydraulic Door System

Sustainable means “pertaining to a system that maintains its own viability by using techniques that allow for continual reuse.” By replacing bifold or roller shutter doors with a Hydroswing® single panel agricultural door on your equipment and/or process buildings, you will probably never have to replace the door again. Hydroswing® is a sustainable solution to all your door needs.


The simplicity of a single panel hydraulic door compared to bifold and roller shutter doors changes face of agricultural buildings. With a Hydroswing®, (complete in its own frame, pre hung, ready to go “pillar to pillar” and right to the header), the wider you go, the better value it becomes. Safe and easy-to-use, the Hydroswing® provides almost zero in life service costs and therefore a guaranteed return on your investment. 

 

When farmers, ranchers and biomass producers consider the potential for door replacement in their older buildings, more and more they are turning to the single panel hydraulic door solution. With internal personnel doors, wind loadings to cope with forces of 200 MPH and strength to keep valuable machinery locked in and secure, the Hydroswing® offers the most attractive and cost effective source in the marketplace today. (Financing made easier than ever through our new equipment leasing program. ) For tractor security, plant and machinery security, Hydroswing® is the only choice for farm, biomass fuel, industrial and grain storage building doors.

 

 The difference is clear to see in the photo above, where one of three buildings has had two roller shutter doors replaced by one efficient, single panel hydraulic door. This addition adds door size, value, and in some instances, may allow you to use old buildings in ways previously not thought possible without constructing a new building. Concentrating on what you do with your building or shed is more important to your bottom line than replacing a door every two or three years.


The Hydroswing® will not pop out of its rails, rust away, flap in the wind, or allow pigeons or other birds in via the roller. With 70% less moving parts than a bifold, the Hydroswing® seals all the way round its own frame, and if required for food regulations, can be made 100% rodent proof. 

 Add value, size and efficiency by replacing your warn out or dangerous bifold or roller shutter doors to your biomass fuel store, grain store or agricultural buildings with a Hydroswing®. Sustain your door for years to come. Buy or lease a Hydroswing today.

 

 

 

Stepping into the Future of Agriculture

15. May 2014 11:14 by Hydroswing in Agriculture, Farm Doors, General

A couple of centuries ago, 90% of the population in the United States lived on farms and produced food. Today, farmers who produce cereals, fruits, vegetables, meat and dairy, only make up 2% of the population and still provide to the masses. To keep up with this ever growing demand, agriculture has turned to modern machinery and technology. In 1940, the data shows that one farmer could feed 19 people. By 2010, that number had increased to 155 people. Changes in equipment, biotech breakthroughs for crop production, and modified barns and storage facilities have allowed for vast improvements throughout the industry.  

 The bottom line: Farms are growing in size because of increased efficiency, and hydraulic doors are playing a huge role. Hydroswing® is playing a huge role. It’s important for all farmers to keep their valuable machinery locked in and secure, and the Hydroswing® single panel hydraulic door is the best choice. The Hydroswing® is operated by two dual-acting hydraulic rams powered by a single or three-phase motor and pump. This in itself provides an extra layer of safety because the Hydrowswing® is impossible to operate without access to the control unit, making it far more secure than other types of doors. And, with almost 100% seal-ability, our door can be easily retrofitted to existing buildings or fitted to new builds for the ultimate in efficiency for all agricultural building or shop doors.

 

 What’s on your farm? Bi-folds? Roller doors? Sliders? Unlike those, the Hydroswing® will not pop out of its rails, rust away, flap in the wind, or allow birds to fly in via the gaps around the door slabs. The Hydroswing® seals all the way around its own frame and if required for food regulations, can be made 100% varmint/bird proof. With Hydroswing, there is freedom to “open end” or “open side” any building, providing unrestricted loading and maneuvering for composting, silage, grain storage, feed/transfer sheds/buildings and farm shops.  The overhead clearance also allows for multiple load discharge saving valuable supplier transport time between loads… all going straight to your bottom line and ROI on your investment in the Hydroswing® single panel hydraulic door system.

 

If you have special coverings/sheeting and sealing requirements, the simplicity and strength of a Hydroswing® allow you to have the door covered in the same as the walls maintaining insulation levels for better efficiency and cost effectiveness over cold winters.

 

Step into the future of efficiency with Hydroswing®. Our doors can be fitted to post and frame , pole barns, stick, steel (PEB), tensile, Quonset, brick and block structures with little or no alteration to an existing building for retro fit or total simplicity when designing your new building to receive the totally “pre hung” Hydroswing®.

 

 

 

 

 

Biomass and Renewable Energy – A Market on the Move

Biomass energy is a hot topic. With a consumption increase of over 60% from 2002 to 2013, it’s easy to see why this sector is growing at such a rapid rate. Biomass is defined as “biological material derived from living, or recently living organisms. Both plant and animal.” Even though wood is considered to be the most prolific source of biomass energy, agriculture is currently producing huge amounts of biomass residue that can be converted to energy.  In 2013, half of all the renewable energy consumed worldwide came from biomass, with the U.S. number coming in at 5%.  (That 5% is enough power to accommodate close to a half a million homes.) The U.K. and Europe are already on the fast track to successful biomass energy platforms, and it’s catching on across the globe. According to recent reports, the use of biomass for energy could change the face of agriculture and provide farmers in the U.S. alone up to $20 billion in new income.   

 

The goal is to convert crop residue, manure and other agricultural byproducts into renewable energy sources. As farmers are learning how to capture and store these resources, they are gaining new revenue streams by producing energy while reducing disposal costs. According to Ag Energy Solutions, farmers can profit from “manure, corn stalks, woody-brush, or even weeds and grasses. By utilizing more of the biological material that grows on the farm, farmers can gain more value from each acre. And because biomass is renewable, and it’s easy to replace harvested trees or crops; these energy-rich waste materials are sustainable indefinitely.”

 

In addition to large, industrial facilities, farmers are beginning to construct buildings (within the guidelines and regulations of their rural area) specifically designed to house biomass. These multifunctional structures are made to store and protect the contents from moisture while creating space to burn and/or transport the material to biomass processing plants.  And Hydroswing® is there too. Our single panel hydraulic doors offer almost complete seal-ability, and with the wide variety of size options, they are the right door at the right time in the right sector.  

 

A current article in Biomass Magazine stated the “USDA Farm Service Agency recently announced the expansion of its Farm Storage and Facility Loan program, which provides low-interest financing to producers. With regard to bioenergy, the loan program can provide low-interest funds to build or upgrade permanent facilities to store eligible commodities, including renewable biomass.” 

With the ability to retro fit to existing buildings or apply to new build, the Hydroswing® adds size, ease of use and value to the processes in the biomass and renewable sector and can easily withstand the rigors of waste and recycling.  Pre hung in its own frame, the Hydroswing® can deliver zero load and reaction to the building is required to be fitted to a tensile or none structural building. Whether high cycling rates or long periods for seasonal storage and holding buildings, the Hydroswing® hydraulic door provides a greater array of working and process efficiencies than traditional sectional, overhead or roller doors with industry leading ROI.

The way we capture and use energy is changing.  The E.U. is already dedicated to the cause and has a goal of 20% of their energy being created by renewables by 2020. The U.S. is catching up and hopes to have 25% dedicated to the same faction by 2015. Hydroswing® remains on the cutting edge of all sectors of industry by providing a product that will easily adapt and play a role in existing facilities and new facilities that are being built to promote this commitment to new energy.