Everything you need to know about Hydraulic Doors for Aviation, Agriculture, Industrial & Architectural use

Hydroswing’s Big Doors – Manufacturing Masterpieces


Until Hydroswing, it was hardly conceivable to think of a hydraulic door larger than 100’ (30m), but times they are a changing!  Hydroswing is ramping up the pace and manufacturing and selling big door after big door… up to 150’ (45m) wide and 40’ (12m) tall! Hydroswing® has broken the size barrier and is charging into the large commercial door and industrial door market. 

These gigantic manufacturing masterpieces are creating a revolution in terms of construction possibilities. Total simplicity, sheer strength, ease of use and reduction in moving parts, plus the use of specialty cladding (which makes the door match the thermal characteristics of the building) are among the top reasons customers are looking to Hydroswing® for their big door needs. The sophistication of large single panel hydraulic doors is now part of everyday door use across every sector. In addition to new doors on new buildings, we are also retrofitting gigantic openings and moving walls. With Hydroswing®, very large walls can be converted into useful and cost effective hydraulic doors. With almost 100% seal-ability, this conversion will forever change the face of commercial and industrial structures around the world.

 

 Before the option of Hydroswing’s large and extra-large singe panel hydraulic doors, openings were restricted. Structures with massive needs had to rely on steel rolling doors or sectional applications. The option of a single panel hydraulic door changed everything. The huge opening capacity, teamed with expanded vertical clearance and an almost air-tight seal, the door essentially becomes another wall. In turn, the enhanced building efficiency reduces both costs across the board.  

Hydroswing® is synonymous with quality. From the beginning, our standards have been the highest in the industry.  All Hydroswing® doors are fabricated in ISO 9001 facilities that adhere to the American Welding Society (AWS) D1.1 code requirements for welding of structural steel. Unlike other manufacturers, we understand the importance of working within specific codes and with vendors who boast an ISO certification.

 

Hydroswing® is overcoming space and size hurdles in the commercial and industrial sectors at a rapid pace. New projects in the works include a “door within a door” allowing for a smaller single panel installation within the confines of a 150’ (45m) main door allowing a wide array of multi-use possibilities. Hydroswing® is single handedly changing the way people use doors in commercial and industrial settings. Our ability to design and create solutions for large industrial doors and large commercial doors will leave a lasting impact on productivity, efficiency and cost effectiveness for any buyer.

 

 

 

 

Hydroswing – Manufactured for Strength, Safety and Security

It’s about quality… At Hydroswing® we build hydraulic doors right. As the original and still the best single panel hydraulic door system on the market, Hydroswing® understands door manufacturing at a core level. Cost effective, safe, and accommodating in sizes up to 150’(45.0 m) wide X 40’(12.0 m) high, our hydraulic door system is being retrofitted in everything from commercial aviation facilities and private airplane and helicopter hangars to barns, agricultural centers, sheds and machine shops.

 

 It’s about the build… Our single panel hydraulic doors are fabricated and welded to ISO 9001 and American Welding Society D1.1 certifications and each is stringently audited for strength and quality assurance. Unlike other manufacturers, we understand the importance of working within specific codes and only with vendors who boast an ISO certification. ISO (International Organization for Standardization) is the largest developer in the world of voluntary International Standards. The Hydroswing is always pre hung in its own frame of the highest grade ASTM 275 tube steel.

 

It’s about strength…  No matter where you are in the world, you need to know your hydraulic door system can tolerate the elements. Hydroswing doors can withstand up to 200 MPH wind loading. We also shot blast prior to painting. This ensures the perfect base for the application of Carboline Carboguard 890, a highly chemical-resistant epoxy mastic coating that adds 50% greater corrosion resistance than any other hydraulic door offered in this category. Shot blasting allows an added layer of inspection of the steel for rare imperfections which remain unseen in non-shot blasted door systems.

 It’s about safety… The Hydroswing® is operated by two dual-acting hydraulic rams powered by a single or three-phase motor and pump, and all of our electrical controls are UL Certified. This in itself provides an extra layer of safety because the Hydrowswing® is impossible to operate without access to the control unit, making it far more secure than other types of doors.

 

 Hydroswing hydraulic door systems are the strongest, safest and most secure doors on the market. Remember, if it doesn’t come from Hydroswing, it’s not a Hydroswing.

 

 

 

 

 

 

 

Hydroswing – Versatile by Design

Versatile is defined as “being capable of or adapted for many different uses.” Versatile can also be defined as Hydroswing®.  After years of research, innovation and progress, Hydroswing has swept the hydraulic door market. There is no limit to what we can do. The Hydroswing® door system adds strength where others cannot, adds reliability where others are unable, provides superior headroom, precision workmanship, strength and reliability when it counts. Our sizing selection offers options and versatility that other systems can’t and we hit the target 100% of the time.


The “Small” Hydroswing®


Our “small” Hydroswing® hydraulic door is considered any door under 35 feet (10.66m) in width. Our small doors have been widely used for T-hangars, box hangars and at small airparks. Also ideal for storage of all kinds, including farms and ranches, or the residential user.  Think custom garage, shed, workshop, small feed storage, movable walls and more.

 

 

The “Medium” Hydroswing®


Our “medium” Hydroswing® hydraulic door is considered any door that measures 35 feet (10.66m) to 65 feet (19.81m).  Ideal for airplane or helicopter hangars, machine shops, grain and feed storage, biomass, and more.

 

 

The “Large” Hydroswing®


Our “large” Hydroswing® hydraulic door is considered any door that measures 65 feet (19.81m) to 95 feet (28.95m). We are true specialists in the large and extra-large and XXL door markets. This is our most popular door for commercial aviation and specialty use. Think all areas of industry including mining, agriculture and aviation.

 

The “Extra Large” Hydroswing®


Our “extra-large” Hydroswing® hydraulic door is considered any door that measures 95 feet (28.95m) to 119 feet (36.27m). We manufacture a hydraulic door that is strong, efficient and tested for quality assurance. The Hydroswing® is being used around the world on commercial buildings, commercial aviation hangars, specialty and other industrial uses.

 

The “XXL” Hydroswing®


Our “XXL” jumbo Hydroswing® hydraulic door is considered any door that measures over 120 feet (36.57m). It takes a specific knowledge to manufacture a door of this magnitude and we are proud to have these doors in use worldwide.

 

The Hydroswing® single panel hydraulic door system delivers on all criteria – strength, adaptability, seal-ability, wind loading, and expanded headroom. Size is never an issue for Hydroswing and we do it all with 70% less moving parts than a traditional bifold door. We boast a higher degree of safety since our doors have no rails or pulleys. Hydroswing® is also 100% more secure than fabric and has been tested to 200 mph in wind load testing. Our doors our manufactured to ISO 9001/ American Welding Society D1.1 standards.

Any size, any place…Hydroswing® is THE large door system of choice around the world.

 

 

 

 

 

 

 

 

ISO 9001/ AWS D1.1 – Because Quality Matters

Hydroswing® is synonymous with quality. From the beginning, our standards have been the highest in the industry.  All Hydroswing® doors are fabricated in ISO 9001 facilities that adhere to the American Welding Society (AWS) D1.1 code requirements for welding of structural steel. Unlike other manufacturers, we understand the importance of working within specific codes and with vendors who boast an ISO certification. ISO (International Organization for Standardization) is the largest developer in the world of voluntary International Standards.  An independent and non-governmental membership organization at work in 165 countries, ISO began in London in 1946 with a goal to “facilitate the international coordination and unification of industrial standards.” Today, ISO has published over 19,500 International Standards covering almost all of manufacturing and technology.

 

 ISO 9001 is part of the ISO 9000 “family of quality management systems standards” designed to help manufacturers meet statutory and regulatory requirements related to a product.  A third party certification provides an “independent confirmation” that companies meet the requirements of ISO 9001. So what does the mean for Hydroswing® customers? It means we are confident in our selected vendors and we pass that quality to our end users.  The ISO 9001 facilities we work with have Quality Management Systems (QMS) in place and are stringently audited for welding and quality assurance. The hydraulic components are sourced centrally in the United States for further continuous quality and supply chain integrity.

 

At Hydroswing®, fabrication quality is just one area we set ourselves apart from others. Our welding is always to AWS D1.1 code which covers the requirements for “any type of welded structure made from the commonly used carbon and low-alloy constructional steels.”  Another example of our quality systems is our shot blasting pre-paint. This ensures the perfect base for the application of Carboline carboguard 890, a highly chemical-resistant epoxy mastic coating that adds 50% greater corrosion resistance than any other hydraulic door offered in this category. Shot blasting allows an added layer of inspection of the steel for rare imperfections which remain unseen in non shot blasted door systems.

 

 The quality control doesn't stop there!  Our patented Hydroswing® bow truss (US D584,831S) is unique in the industry and use only premium hydraulic lines, hoses and connectors. To make our standards complete, we also use only UL certified controls motors and pumps.  It’s all about quality. It’s Hydroswing. For more information about ISO and ISO 9001 certification, visit www.iso.org 

The Future of Mining Machinery is Looking Bright and Hydroswing Will Be There

1. February 2014 13:14 by Hydroswing in General, Mining, Mining Doors

Heavy machinery is synonymous with mining. It’s used in every aspect of the sector from exploration and development of sites to break down and removal of rocks to processing and reclamation. The total number of mines in world is upwards of 25,000 producing industrial minerals and almost 100,000 quarries that produce aggregates used in the construction sector. Regardless of those impressive numbers, mining equipment manufacturers have had some fairly substantial ups and downs over the last several years. In the recent past, the trend was towards decline, but it looks like the market is about to change.  

 The major mining machinery manufacturers that took some huge revenue hits last year are cheering the upbeat forecast. According to a study by the industry market research firm, The Freedonia Group, growth in this sector is about to blossom.  The study they conducted predicts that “global demand for mining machinery is forecast to expand 8.6% per year through 2017 to USD $135 billion.” And that’s good news for everyone.


The study goes on “to highlight the Asia Pacific region and both Central and South America as the fastest growing markets for mining equipment.”  According to an article recently published on the Pit & Quarry website: “The study also forecasts strong gains in South America, as mining companies look to develop the region’s sizable deposits of bauxite, copper and iron ore. The dissipation of copper oversupply issues that existed in 2012 and 2013 will allow prices to recover and boost associated mining equipment demand in areas rich in copper, such as Chile and Peru. The Africa/Mideast region will post the next fastest advances, followed by Eastern and Western Europe and North America.”

 

Steel and aluminum production has also seen growth so the demand for metals mining equipment is keeping pace. Studies show this sector of mining will rise at the fastest pace over the next three years. In addition, construction spending is increasing and global agriculture output is on the rise. Therefore, it will be important that mining equipment manufacturers and all the vendors that work within this sector keep step. Hydroswing® plans to march to the front of the line.


Ironically, the process which is powering the USA and many other parts of the world’s mining, exploration and heavy plant machinery along is a hydraulic process is called “Hydraulic fracturing.” This “fracturing” has made it possible to tap in and release huge oil, gas and other valuable reserves. The shale oil industry has seen the growth of machinery for this sector in both size and numbers, all of which are dependent on hydraulics for power, strength and load bearing.

 


The use of hydraulics is nothing new to the mining sector. The technology is a standard consideration in their processes. Understanding the magnitude of the market, mining is quickly becoming a strong focus for Hydroswing®. Large and extra large hydraulic doors are making an impact in the marketplace for storage and maintenance of heavy machinery. With Hydroswing®, mining equipment manufacturers can easily house bulldozers, grading equipment, drilling rigs, the latest CAT tippers and a plethora of other machinery in easy-to-access sheds, and ISO shipping container shelters with openings which easily accommodate the latest CAT/TEREX/DEERE/KOMATSU/JCB and SANDVIG machinery.  With 70% less moving parts than a bifold door and enormous strength, the Hydroswing® hydraulic door is a simple and cost effective solution that will successfully fit into the ever growing demand in the mining sector. Hydraulics are well known to the mining industry and now mining door systems are following suit.