Everything you need to know about Hydraulic Doors for Aviation, Agriculture, Industrial & Architectural use

It’s Simple… Replace your Bifold Door. It’s Dangerous.

More and more, the news about bifolds is bad. After multiple deaths in the U.S. and Europe, it won’t be long before the bifold is banned for good. Because of the way the majority of bifolds are built, there is no anti-drop mechanism or other device to prevent the door from from free-falling if there is a failure in the drive or suspension mechanism. Clearly, this is a hazard and has proven fatal in some door accidents.

Recently, two people were killed in the in the U.K. where a bifold dropped. This prompted an investigation by the Health & Safety Executive who determined the door hazardous. In April of 2014, a man was killed in Minnesota after being wrapped around an unprotected lower winding shaft (See the article here: http://cbsloc.al/1kw0wyr.) As long ago as 2002, according to OSHA and the US Department of Labor a death occurred because of a bifold door. “Apparently because the saddle clamps had been installed improperly. One cable, immediately adjacent to the loosened cable was missing entirely, and the door began moving downward on the right side. The tilting caused the door roller to come out of its track. The lower portion of the door then struck an Employee.” (See the report here: http://1.usa.gov/1DvHhiT.) It’s evident that several bifold manufacturers continue to operate without even the slightest compliance or self-governance.

 

Technology has moved on from wires, cables, pulleys and straps. The world is becoming simpler and safer. Hydraulic doors will soon be the only logical choice for not only aviation, but for agriculture, architecture and mining sectors as well. From a safety perspective, by its very nature, the bifold door is outdated and dangerous.

The Hydroswing® Hydraulic Door is a single panel hydraulic door solution that replaces ALL bifold doors. We have all safety standards in place and our doors are manufactured at ISO 9001 certified plants and to AWS D1.1 standards.   Our zero drop two-way Hydrolok system assures the door will never fall should there ever be a loss of power. No cables. No pulleys. No straps. NO DANGER. We proudly boast over 7,000 Hydroswing® in service and a growing number of bi-fold replacements are coming in on a regular basis. We can retrofit any building or any opening.

 


In addition to safety, replacing a bifold is also a smart value proposition. In many instances the useful service life of a door is defined by the economic viability of replacing a dangerous, inefficient bifold. Installing a new Hydroswing hydraulic door system transforms your structure and extends the life of your building. By removing the bifold door and replacing it with the simple, pre-hung single panel Hydroswing® door system, a structure is revitalized at a fraction of the cost of a new build. With no impact to the existing building, easy installation (usually only one day), very low maintenance costs, increased overhead space and 90% fewer moving parts than the bifold, Hydroswing is quickly becoming the number one replacement door in the world. 

 


Let us solve your bifold problem today!

 

 

 

 

 

 

 

Hydroswing – Designed by Farmers for Farmers

2. October 2015 08:15 by Hydroswing in Farm Doors

Hydroswing® was born in agriculture. We understand the unique needs of the farmers, and we understand the construction of a multitude of buildings and structures used in this sector. Over the past century, agriculture has been strongly influenced by enhanced mechanization, but even more so by how humans operate those machines. Though the fundamentals of agricultural machinery are basically the same, the technology, size, scope and capabilities have evolved dramatically. Keeping pace with the changes is how farmers “house” their equipment.  Over the last decade the single panel hydraulic agricultural door has become the “door of choice” for farmers across the country. Bifolds are unsafe, and roller doors are outdated. The superior technology, safety and sophistication of the Hydroswing hydraulic door system is revolutionizing the way farmers close their shops, sheds, barns and buildings.

Whether its post and frame, metal, Quonset, or any other type of structure, a single panel Hydroswing® hydraulic door system provides a maximum opening dimension, very little impact on the building, maximum strength, almost 100% “sealability,” very low in service life costs, reliability, massively reduced number moving parts and greater safety. The agriculture industry revolves heavily around hydraulics, so it’s easy to see why the Hydroswing® has become the premier door for farmers across the country and around the world.

The post frame build can vary tremendously depending on the size and scope of the end structure. Hydroswing® can fit and/or retro fit almost any pole barn or post frame building with doors as large as 40' tall to 150' wide. Our system creates reduced building height/cost WITHOUT reduced door opening dimension, and a very small part count in the structural mechanism of the door (no pulleys of any kind). Today’s farmer is looking for simplicity and quality. The Hydroswing® offers an integral pre-hung frame that has little dependence on the building, which allows us to easily adapt a door to any structure. From an aesthetic perspective, the ability to clad the door with the same thermal properties as the building walls, keeps the visual clean and modern.

Pre-engineered metal buildings (PEB’s) have also been prominent in agricultural settings. The structures originally became popular during World War II for barracks and maintenance facilities. After the war, the industry continued to blossom and with the power of computer aided design (CAD), today’s metal buildings can be applied to almost any non-residential use. The Hydroswing® fits easily into new construction on metal buildings or is the ideal choice for replacing an outdated or beyond economic repair existing door such as a bifold, slider or top hung.

 

The concept behind Hydroswing’s strong, single-panel, hydraulic design was born and bred by the demand for a more efficient door from the farmers and ranchers in the rural area. Hydroswing® has quickly become the door of choice for savvy Ag industry professionals. Although the Hydroswing phenomenon now reaches across a variety of industries, the agricultural customer remains the backbone of the business.  Hydroswing® doors are engineered specifically to provide a cost-effective solution to meet the demands of the agricultural industry. Hydroswing® delivers strength, efficiency and reliability, utilizing the same hydraulic technology that you use on your heavy equipment every day to get the job done. Why would you trust anything less for your doors?

 

 

 

 

 

Need a Hydraulic Door Part?

Hydroswing® innovates again! The new Hydraulic Door “Parts Store” is rolling!  Our years of experience in the world of Hydraulic doors has taught us a thing or two, mainly how difficult it is to get a hold of spare parts. The initial “fleet” of single panel hydraulic doors produced by Hydroswing® is beginning to mature, so it made sense to create a source for the naturally aging parts. Our new Hydraulic Door Parts Store is not only a one-stop-shop for ALL your Hydroswing® hangar and shop door needs, but we can also source and upgrade parts for other doors on the market. 

 

We have crafted the Hydraulic Door Parts Store to serve as an online resource for worn seals, weather strips, motors, controls, hoses and connectors. We have also created an opportunity (subject to certain required information) to allow our “early adopters” to buy latest generation upgrades. This allows customers to continue to enjoy their perfectly good Hydroswing® doors but with the benefit of updated generation cylinders with integral, zero drop Hydroloks, a new Push Button Station and Remote, or a new weather seal that may be in need of replacement.

 

The Parts Store is one-stop-shopping for anyone in need of any part for any hydraulic door. Our troubleshooting guide will help you determine what you may need for your door. We have everything from O-rings for old rams, to kits that service cylinders. You’ll also find replacement hinges, pin points, spherical bearings, seals and weather-proofing to hard and soft lines, hydraulic couplings, and complete pumps and motors, and more.

 


With over 7,000 Hydroswing® door systems in use worldwide, we know our parts. Our unique hydraulic door Parts Store will even offer “green” hydraulic fluid for use in areas with specialty environmental controls. Hydroswing® will continue to change the face of the door industry bringing hydraulic technologies and parts to customers worldwide. Visit the Parts Store today for all your Hydraulic Door Part needs. www.hydraulicdoorparts.com

 

 

 

 

How’s it Hanging... Hydroswing’s Detailed Mounting Protocols Show How it’s Done

Simple, strong, secure… that’s our motto at Hydroswing®. Whether it’s retrofit or a new build, we are dedicated to having the easiest and most efficient process in the industry. If you need a hydraulic door, not only will we customize it for your space, we make sure you know how it works. Our “Mounting Protocols” demonstrate to all door owners the intricate details of how the door can be hung. We offer illustrations of everything from product attachments and positions of the door for installation, to the anatomy of the Hydroswing® door and full descriptions of different types of headers. 

 

Customization is one of our most important selling points so it’s critical that our customers know our “attach angle” can be made to mount our door to metal girders, concrete, block or wood buildings. Then the door will be bolted or welded in place per the protocols. (We don’t supply the headers or door pillars, but we do survey large doors and will engineer flanges to brace the existing door pillars and the Hydroswing® door jamb.)

 

Also key for most Hydroswing® door owners is “how” the door will be mounted. Our protocols detail three ways: Inside or Flush Mounting (where the door inside the building header and jamb making it flush with the face of the building), Outside Mounting (which is common in existing buildings and the door will fit against the face of the building) and Rear Mounting (this would connect the door to the rear of your building).

 

 

 Whatever your questions, we have the answers and our downloadable protocols will guide the way. Simplicity, strength, ease of use and reduction in moving parts, plus use of cladding (which makes the door match the thermal characteristics of the building) are among the top reasons customers are making the switch to Hydroswing®. The sophistication of our single panel hydraulic door system is now part of everyday door use for facilities large and small across the U.S. and around the world. The Hydroswing® single panel door system is like no other. Through the implementation of the Hydroswing® we lead to new efficiencies in building and wall designs. Remember, if it doesn’t come from Hydroswing®, it’s not a Hydroswing®.

 

 

 

 

 

 

 

 

 

 

 

At Hydroswing … Our Specifications do the Talking

The Hydroswing® detailed spec sheet is here!  For our customers, seeing is believing and knowledge is power… and we know hydraulic doors. Our hydraulic door spec sheets are designed to summarize the technical characteristics and performance of the Hydroswing hydraulic door system. 

 

The Hydroswing technical specification document provides clearly defined detail to be used by a design engineers, architects, builders, contractors, or any door owner (or potential door owner) to understand all the components of the Hydroswing hydraulic door system. Hydraulics are the foundation of the future. The simplicity of liquid fluid power moving heavy objects is a solution that fits into all sectors of building and manufacturing. Hydroswing is the original and still the best hydraulic door on the market and we have a profound understanding of what it takes to create an extraordinary product.

Our specs include:
• Product overview
• Product features
• Steel frame schematic 
• Standard and basic attachment details
• Wiring and circuit diagram
• Electrical systems options
• Hydraulic circuit diagram
• Hydraulic cylinder schematic
• Available options (which include, a CCTV camera to monitor outside of the door prior to opening, an audible warning alarm to operate while the door is in motion, a visual (flashing light) warning signal to operate while the door is in motion, motion detectors on the sides of door to stop door if activated by personnel or a vehicle, hand pump for manual operation, cane bolts to lock the door to the floor on the inside, personnel door within the main door, and more.)

 

A fundamental feature of any hydraulic system is the ability to apply force or torque multiplication in an easy way, independent of the distance between the input and output, without the need for mechanical gears or levers. This concept, used in large machinery worldwide for decades, is demonstrated in detail in our specs, and is at the core of the Hydroswing hydraulic door system.

Simplicity, safety, strength, ease of use and reduction in moving parts, plus use of cladding (which makes the door match the thermal characteristics of the building) make Hydroswing® the hydraulic door system of choice. The sophistication of single panel hydraulic door system is now part of everyday door use for facilities large and small across the U.S. and around the world.

Click here to see our specs for the USA.
Click here to see our specs for the UK, Europe and the rest of the world.

 

 Remember, if it doesn’t come from Hydroswing®… It’s not a Hydroswing®

 

 

 

 

Hydroswing – Versatile by Design

Versatile is defined as “being capable of or adapted for many different uses.” Versatile can also be defined as Hydroswing®.  After years of research, innovation and progress, Hydroswing has swept the hydraulic door market. There is no limit to what we can do. The Hydroswing® door system adds strength where others cannot, adds reliability where others are unable, provides superior headroom, precision workmanship, strength and reliability when it counts. Our sizing selection offers options and versatility that other systems can’t and we hit the target 100% of the time.


The “Small” Hydroswing®


Our “small” Hydroswing® hydraulic door is considered any door under 35 feet (10.66m) in width. Our small doors have been widely used for T-hangars, box hangars and at small airparks. Also ideal for storage of all kinds, including farms and ranches, or the residential user.  Think custom garage, shed, workshop, small feed storage, movable walls and more.

 

 

The “Medium” Hydroswing®


Our “medium” Hydroswing® hydraulic door is considered any door that measures 35 feet (10.66m) to 65 feet (19.81m).  Ideal for airplane or helicopter hangars, machine shops, grain and feed storage, biomass, and more.

 

 

The “Large” Hydroswing®


Our “large” Hydroswing® hydraulic door is considered any door that measures 65 feet (19.81m) to 95 feet (28.95m). We are true specialists in the large and extra-large and XXL door markets. This is our most popular door for commercial aviation and specialty use. Think all areas of industry including mining, agriculture and aviation.

 

The “Extra Large” Hydroswing®


Our “extra-large” Hydroswing® hydraulic door is considered any door that measures 95 feet (28.95m) to 119 feet (36.27m). We manufacture a hydraulic door that is strong, efficient and tested for quality assurance. The Hydroswing® is being used around the world on commercial buildings, commercial aviation hangars, specialty and other industrial uses.

 

The “XXL” Hydroswing®


Our “XXL” jumbo Hydroswing® hydraulic door is considered any door that measures over 120 feet (36.57m). It takes a specific knowledge to manufacture a door of this magnitude and we are proud to have these doors in use worldwide.

 

The Hydroswing® single panel hydraulic door system delivers on all criteria – strength, adaptability, seal-ability, wind loading, and expanded headroom. Size is never an issue for Hydroswing and we do it all with 70% less moving parts than a traditional bifold door. We boast a higher degree of safety since our doors have no rails or pulleys. Hydroswing® is also 100% more secure than fabric and has been tested to 200 mph in wind load testing. Our doors our manufactured to ISO 9001/ American Welding Society D1.1 standards.

Any size, any place…Hydroswing® is THE large door system of choice around the world.

 

 

 

 

 

 

 

 

Hydroswing – The Basics

Hydraulics are the foundation of the future. The simplicity of liquid fluid power moving heavy objects is a solution that fits into all sectors of building and manufacturing. Hydroswing is the original and still the best hydraulic door on the market and we have a profound understanding of what it takes to create an extraordinary product.

 

 The anatomy of a Hydroswing Door

 

A fundamental feature of any hydraulic system is the ability to apply force or torque multiplication in an easy way, independent of the distance between the input and output, without the need for mechanical gears or levers. This concept, used in large machinery worldwide for decades, is at the core of the Hydroswing hydraulic door. The Hydroswing® is operated by two dual-acting hydraulic rams powered by a single or three-phase motor and pump, and all of our electrical controls are UL Certified. This in itself provides an extra layer of safety because the Hydrowswing® is impossible to operate without access to the control unit, making it far more secure than other types of doors.)

 

Simple, powerful and secure

Our single panel doors are fabricated and welded to ISO 9001 and American Welding Society D1.1 standards and each is stringently audited for strength and quality assurance. The Hydroswing is always pre hung in its own frame of tube steel. Unlike inferior products on the market, the Hydroswing is an industry leader in post fabrication shot blasting. We use a Carboline Carboguard 890 Epoxy paint finish with a certificate of conformance being supplied with each door to ensure the integrity of this work.

Simplicity, strength, ease of use and reduction in moving parts, plus use of cladding (which makes the door match the thermal characteristics of the building) are among the top reasons customers are making the switch to Hydroswing®. The sophistication of single panel hydraulic doors is now part of everyday door use for facilities large and small across the U.S. and around the world.

 

The Hydroswing finds itself in all kinds of places!

Cost effective, safe, and accommodating in sizes up to 150’(45.0 m) wide  X 40’(12.0 m) high, our hydraulic door is being retrofitted in everything from commercial aviation facilities and private airplane and helicopter hangars to barns, agricultural centers, sheds and machine shops.

 

Remember, if it doesn’t come from Hydroswing,

it’s not a Hydroswing.

 

 

 

ISO 9001/ AWS D1.1 – Because Quality Matters

Hydroswing® is synonymous with quality. From the beginning, our standards have been the highest in the industry.  All Hydroswing® doors are fabricated in ISO 9001 facilities that adhere to the American Welding Society (AWS) D1.1 code requirements for welding of structural steel. Unlike other manufacturers, we understand the importance of working within specific codes and with vendors who boast an ISO certification. ISO (International Organization for Standardization) is the largest developer in the world of voluntary International Standards.  An independent and non-governmental membership organization at work in 165 countries, ISO began in London in 1946 with a goal to “facilitate the international coordination and unification of industrial standards.” Today, ISO has published over 19,500 International Standards covering almost all of manufacturing and technology.

 

 ISO 9001 is part of the ISO 9000 “family of quality management systems standards” designed to help manufacturers meet statutory and regulatory requirements related to a product.  A third party certification provides an “independent confirmation” that companies meet the requirements of ISO 9001. So what does the mean for Hydroswing® customers? It means we are confident in our selected vendors and we pass that quality to our end users.  The ISO 9001 facilities we work with have Quality Management Systems (QMS) in place and are stringently audited for welding and quality assurance. The hydraulic components are sourced centrally in the United States for further continuous quality and supply chain integrity.

 

At Hydroswing®, fabrication quality is just one area we set ourselves apart from others. Our welding is always to AWS D1.1 code which covers the requirements for “any type of welded structure made from the commonly used carbon and low-alloy constructional steels.”  Another example of our quality systems is our shot blasting pre-paint. This ensures the perfect base for the application of Carboline carboguard 890, a highly chemical-resistant epoxy mastic coating that adds 50% greater corrosion resistance than any other hydraulic door offered in this category. Shot blasting allows an added layer of inspection of the steel for rare imperfections which remain unseen in non shot blasted door systems.

 

 The quality control doesn't stop there!  Our patented Hydroswing® bow truss (US D584,831S) is unique in the industry and use only premium hydraulic lines, hoses and connectors. To make our standards complete, we also use only UL certified controls motors and pumps.  It’s all about quality. It’s Hydroswing. For more information about ISO and ISO 9001 certification, visit www.iso.org 

The “Sustainable” Single Panel Hydraulic Door System

Sustainable means “pertaining to a system that maintains its own viability by using techniques that allow for continual reuse.” By replacing bifold or roller shutter doors with a Hydroswing® single panel agricultural door on your equipment and/or process buildings, you will probably never have to replace the door again. Hydroswing® is a sustainable solution to all your door needs.


The simplicity of a single panel hydraulic door compared to bifold and roller shutter doors changes face of agricultural buildings. With a Hydroswing®, (complete in its own frame, pre hung, ready to go “pillar to pillar” and right to the header), the wider you go, the better value it becomes. Safe and easy-to-use, the Hydroswing® provides almost zero in life service costs and therefore a guaranteed return on your investment. 

 

When farmers, ranchers and biomass producers consider the potential for door replacement in their older buildings, more and more they are turning to the single panel hydraulic door solution. With internal personnel doors, wind loadings to cope with forces of 200 MPH and strength to keep valuable machinery locked in and secure, the Hydroswing® offers the most attractive and cost effective source in the marketplace today. (Financing made easier than ever through our new equipment leasing program. ) For tractor security, plant and machinery security, Hydroswing® is the only choice for farm, biomass fuel, industrial and grain storage building doors.

 

 The difference is clear to see in the photo above, where one of three buildings has had two roller shutter doors replaced by one efficient, single panel hydraulic door. This addition adds door size, value, and in some instances, may allow you to use old buildings in ways previously not thought possible without constructing a new building. Concentrating on what you do with your building or shed is more important to your bottom line than replacing a door every two or three years.


The Hydroswing® will not pop out of its rails, rust away, flap in the wind, or allow pigeons or other birds in via the roller. With 70% less moving parts than a bifold, the Hydroswing® seals all the way round its own frame, and if required for food regulations, can be made 100% rodent proof. 

 Add value, size and efficiency by replacing your warn out or dangerous bifold or roller shutter doors to your biomass fuel store, grain store or agricultural buildings with a Hydroswing®. Sustain your door for years to come. Buy or lease a Hydroswing today.

 

 

 

Introducing Hydroswing® Leasing -The Best and Original Hydroswing® Hydraulic Door Can now be Leased as Equipment

It’s no secret that equipment leasing is a leading choice for the agriculture, aviation and industrial sectors.  With equipment being the mainstay, owners have looked to leasing to help the cash flow crunch while allowing them to quickly acquire the latest technology. Since 1960 private fixed investment in equipment increased from $29.7 billion to almost $1 trillion in 2012. In 2013, that number continued to rise. Nonetheless, the economy has made it difficult for businesses to part with cash, even though they are in need of new equipment. Leasing solves that problem. And now Hydroswing® enters the arena and expands the possibilities across all sectors. A door is no longer a door. Thanks to Hydroswing® Leasing, any hydraulic door we manufacture can be considered a piece of working capital equipment.

 

In agriculture alone, leasing of equipment exceeds $6 billion in annual volume in the United States. In aviation, approximately 30% of the world’s aircraft are leased, and that number continues to increase. Leasing works and Hydroswing® is on board. Hydroswing® Leasing is the first program of its kind to offer hydraulic doors as equipment: No money down, low payments ($49.99 per week) and a $1.00 buyout at the end of the lease. There will always be more old buildings than new, and with a Hydroswing® lease, it’s easier than ever to replace your obsolete door system and enjoy the efficiency and advanced technology of the original Hydroswing® hydraulic door. 

 Leasing a door is not as complicated as it seems. It’s a painless process that preserve your line of credit, let you keep your cash flow in place and can immediately add value to your business.  In addition, lessees can take an immediate write-off of dollars spent rather than waiting for equipment or storage facilities to depreciate over several years. You’ll also have the option of deduction 100% of your lease payment as a business expense. To make the package complete, a Hydroswing® lease allows for opportunity to eliminate or minimize shipping and install costs. It’s a “win win” all the way around.

 

 Hydroswing® Leasing is a game changer for industry. Hydroswing® has over 7,000 doors in use and is being manufactured in ISO 9001 approved global manufacturing plants worldwide. Hydraulics are the most effective door choice. The advantages: Less than 70% of the moving parts of the bifold door and 50% less moving parts than sectional, bottom rolling, or top hung doors with 95% less maintenance costs. The Hydroswing® easily retro fits to replace the bi-fold, bottom rolling, top hung, sectional or fabric doors, and is ideal for new builds, steel, post and frame or block structure. Now everything is possible with a Hydroswing® door.