Everything you need to know about Hydraulic Doors for Aviation, Agriculture, Industrial & Architectural use

It’s Simple… Replace your Bifold Door. It’s Dangerous.

More and more, the news about bifolds is bad. After multiple deaths in the U.S. and Europe, it won’t be long before the bifold is banned for good. Because of the way the majority of bifolds are built, there is no anti-drop mechanism or other device to prevent the door from from free-falling if there is a failure in the drive or suspension mechanism. Clearly, this is a hazard and has proven fatal in some door accidents.

Recently, two people were killed in the in the U.K. where a bifold dropped. This prompted an investigation by the Health & Safety Executive who determined the door hazardous. In April of 2014, a man was killed in Minnesota after being wrapped around an unprotected lower winding shaft (See the article here: http://cbsloc.al/1kw0wyr.) As long ago as 2002, according to OSHA and the US Department of Labor a death occurred because of a bifold door. “Apparently because the saddle clamps had been installed improperly. One cable, immediately adjacent to the loosened cable was missing entirely, and the door began moving downward on the right side. The tilting caused the door roller to come out of its track. The lower portion of the door then struck an Employee.” (See the report here: http://1.usa.gov/1DvHhiT.) It’s evident that several bifold manufacturers continue to operate without even the slightest compliance or self-governance.

 

Technology has moved on from wires, cables, pulleys and straps. The world is becoming simpler and safer. Hydraulic doors will soon be the only logical choice for not only aviation, but for agriculture, architecture and mining sectors as well. From a safety perspective, by its very nature, the bifold door is outdated and dangerous.

The Hydroswing® Hydraulic Door is a single panel hydraulic door solution that replaces ALL bifold doors. We have all safety standards in place and our doors are manufactured at ISO 9001 certified plants and to AWS D1.1 standards.   Our zero drop two-way Hydrolok system assures the door will never fall should there ever be a loss of power. No cables. No pulleys. No straps. NO DANGER. We proudly boast over 7,000 Hydroswing® in service and a growing number of bi-fold replacements are coming in on a regular basis. We can retrofit any building or any opening.

 


In addition to safety, replacing a bifold is also a smart value proposition. In many instances the useful service life of a door is defined by the economic viability of replacing a dangerous, inefficient bifold. Installing a new Hydroswing hydraulic door system transforms your structure and extends the life of your building. By removing the bifold door and replacing it with the simple, pre-hung single panel Hydroswing® door system, a structure is revitalized at a fraction of the cost of a new build. With no impact to the existing building, easy installation (usually only one day), very low maintenance costs, increased overhead space and 90% fewer moving parts than the bifold, Hydroswing is quickly becoming the number one replacement door in the world. 

 


Let us solve your bifold problem today!

 

 

 

 

 

 

 

Hydroswing – Designed by Farmers for Farmers

2. October 2015 08:15 by Hydroswing in Farm Doors

Hydroswing® was born in agriculture. We understand the unique needs of the farmers, and we understand the construction of a multitude of buildings and structures used in this sector. Over the past century, agriculture has been strongly influenced by enhanced mechanization, but even more so by how humans operate those machines. Though the fundamentals of agricultural machinery are basically the same, the technology, size, scope and capabilities have evolved dramatically. Keeping pace with the changes is how farmers “house” their equipment.  Over the last decade the single panel hydraulic agricultural door has become the “door of choice” for farmers across the country. Bifolds are unsafe, and roller doors are outdated. The superior technology, safety and sophistication of the Hydroswing hydraulic door system is revolutionizing the way farmers close their shops, sheds, barns and buildings.

Whether its post and frame, metal, Quonset, or any other type of structure, a single panel Hydroswing® hydraulic door system provides a maximum opening dimension, very little impact on the building, maximum strength, almost 100% “sealability,” very low in service life costs, reliability, massively reduced number moving parts and greater safety. The agriculture industry revolves heavily around hydraulics, so it’s easy to see why the Hydroswing® has become the premier door for farmers across the country and around the world.

The post frame build can vary tremendously depending on the size and scope of the end structure. Hydroswing® can fit and/or retro fit almost any pole barn or post frame building with doors as large as 40' tall to 150' wide. Our system creates reduced building height/cost WITHOUT reduced door opening dimension, and a very small part count in the structural mechanism of the door (no pulleys of any kind). Today’s farmer is looking for simplicity and quality. The Hydroswing® offers an integral pre-hung frame that has little dependence on the building, which allows us to easily adapt a door to any structure. From an aesthetic perspective, the ability to clad the door with the same thermal properties as the building walls, keeps the visual clean and modern.

Pre-engineered metal buildings (PEB’s) have also been prominent in agricultural settings. The structures originally became popular during World War II for barracks and maintenance facilities. After the war, the industry continued to blossom and with the power of computer aided design (CAD), today’s metal buildings can be applied to almost any non-residential use. The Hydroswing® fits easily into new construction on metal buildings or is the ideal choice for replacing an outdated or beyond economic repair existing door such as a bifold, slider or top hung.

 

The concept behind Hydroswing’s strong, single-panel, hydraulic design was born and bred by the demand for a more efficient door from the farmers and ranchers in the rural area. Hydroswing® has quickly become the door of choice for savvy Ag industry professionals. Although the Hydroswing phenomenon now reaches across a variety of industries, the agricultural customer remains the backbone of the business.  Hydroswing® doors are engineered specifically to provide a cost-effective solution to meet the demands of the agricultural industry. Hydroswing® delivers strength, efficiency and reliability, utilizing the same hydraulic technology that you use on your heavy equipment every day to get the job done. Why would you trust anything less for your doors?

 

 

 

 

 

Hydroswing’s Big Doors – Manufacturing Masterpieces


Until Hydroswing, it was hardly conceivable to think of a hydraulic door larger than 100’ (30m), but times they are a changing!  Hydroswing is ramping up the pace and manufacturing and selling big door after big door… up to 150’ (45m) wide and 40’ (12m) tall! Hydroswing® has broken the size barrier and is charging into the large commercial door and industrial door market. 

These gigantic manufacturing masterpieces are creating a revolution in terms of construction possibilities. Total simplicity, sheer strength, ease of use and reduction in moving parts, plus the use of specialty cladding (which makes the door match the thermal characteristics of the building) are among the top reasons customers are looking to Hydroswing® for their big door needs. The sophistication of large single panel hydraulic doors is now part of everyday door use across every sector. In addition to new doors on new buildings, we are also retrofitting gigantic openings and moving walls. With Hydroswing®, very large walls can be converted into useful and cost effective hydraulic doors. With almost 100% seal-ability, this conversion will forever change the face of commercial and industrial structures around the world.

 

 Before the option of Hydroswing’s large and extra-large singe panel hydraulic doors, openings were restricted. Structures with massive needs had to rely on steel rolling doors or sectional applications. The option of a single panel hydraulic door changed everything. The huge opening capacity, teamed with expanded vertical clearance and an almost air-tight seal, the door essentially becomes another wall. In turn, the enhanced building efficiency reduces both costs across the board.  

Hydroswing® is synonymous with quality. From the beginning, our standards have been the highest in the industry.  All Hydroswing® doors are fabricated in ISO 9001 facilities that adhere to the American Welding Society (AWS) D1.1 code requirements for welding of structural steel. Unlike other manufacturers, we understand the importance of working within specific codes and with vendors who boast an ISO certification.

 

Hydroswing® is overcoming space and size hurdles in the commercial and industrial sectors at a rapid pace. New projects in the works include a “door within a door” allowing for a smaller single panel installation within the confines of a 150’ (45m) main door allowing a wide array of multi-use possibilities. Hydroswing® is single handedly changing the way people use doors in commercial and industrial settings. Our ability to design and create solutions for large industrial doors and large commercial doors will leave a lasting impact on productivity, efficiency and cost effectiveness for any buyer.

 

 

 

 

How’s it Hanging... Hydroswing’s Detailed Mounting Protocols Show How it’s Done

Simple, strong, secure… that’s our motto at Hydroswing®. Whether it’s retrofit or a new build, we are dedicated to having the easiest and most efficient process in the industry. If you need a hydraulic door, not only will we customize it for your space, we make sure you know how it works. Our “Mounting Protocols” demonstrate to all door owners the intricate details of how the door can be hung. We offer illustrations of everything from product attachments and positions of the door for installation, to the anatomy of the Hydroswing® door and full descriptions of different types of headers. 

 

Customization is one of our most important selling points so it’s critical that our customers know our “attach angle” can be made to mount our door to metal girders, concrete, block or wood buildings. Then the door will be bolted or welded in place per the protocols. (We don’t supply the headers or door pillars, but we do survey large doors and will engineer flanges to brace the existing door pillars and the Hydroswing® door jamb.)

 

Also key for most Hydroswing® door owners is “how” the door will be mounted. Our protocols detail three ways: Inside or Flush Mounting (where the door inside the building header and jamb making it flush with the face of the building), Outside Mounting (which is common in existing buildings and the door will fit against the face of the building) and Rear Mounting (this would connect the door to the rear of your building).

 

 

 Whatever your questions, we have the answers and our downloadable protocols will guide the way. Simplicity, strength, ease of use and reduction in moving parts, plus use of cladding (which makes the door match the thermal characteristics of the building) are among the top reasons customers are making the switch to Hydroswing®. The sophistication of our single panel hydraulic door system is now part of everyday door use for facilities large and small across the U.S. and around the world. The Hydroswing® single panel door system is like no other. Through the implementation of the Hydroswing® we lead to new efficiencies in building and wall designs. Remember, if it doesn’t come from Hydroswing®, it’s not a Hydroswing®.

 

 

 

 

 

 

 

 

 

 

 

Hydroswing – The Basics

Hydraulics are the foundation of the future. The simplicity of liquid fluid power moving heavy objects is a solution that fits into all sectors of building and manufacturing. Hydroswing is the original and still the best hydraulic door on the market and we have a profound understanding of what it takes to create an extraordinary product.

 

 The anatomy of a Hydroswing Door

 

A fundamental feature of any hydraulic system is the ability to apply force or torque multiplication in an easy way, independent of the distance between the input and output, without the need for mechanical gears or levers. This concept, used in large machinery worldwide for decades, is at the core of the Hydroswing hydraulic door. The Hydroswing® is operated by two dual-acting hydraulic rams powered by a single or three-phase motor and pump, and all of our electrical controls are UL Certified. This in itself provides an extra layer of safety because the Hydrowswing® is impossible to operate without access to the control unit, making it far more secure than other types of doors.)

 

Simple, powerful and secure

Our single panel doors are fabricated and welded to ISO 9001 and American Welding Society D1.1 standards and each is stringently audited for strength and quality assurance. The Hydroswing is always pre hung in its own frame of tube steel. Unlike inferior products on the market, the Hydroswing is an industry leader in post fabrication shot blasting. We use a Carboline Carboguard 890 Epoxy paint finish with a certificate of conformance being supplied with each door to ensure the integrity of this work.

Simplicity, strength, ease of use and reduction in moving parts, plus use of cladding (which makes the door match the thermal characteristics of the building) are among the top reasons customers are making the switch to Hydroswing®. The sophistication of single panel hydraulic doors is now part of everyday door use for facilities large and small across the U.S. and around the world.

 

The Hydroswing finds itself in all kinds of places!

Cost effective, safe, and accommodating in sizes up to 150’(45.0 m) wide  X 40’(12.0 m) high, our hydraulic door is being retrofitted in everything from commercial aviation facilities and private airplane and helicopter hangars to barns, agricultural centers, sheds and machine shops.

 

Remember, if it doesn’t come from Hydroswing,

it’s not a Hydroswing.

 

 

 

The “Sustainable” Single Panel Hydraulic Door System

Sustainable means “pertaining to a system that maintains its own viability by using techniques that allow for continual reuse.” By replacing bifold or roller shutter doors with a Hydroswing® single panel agricultural door on your equipment and/or process buildings, you will probably never have to replace the door again. Hydroswing® is a sustainable solution to all your door needs.


The simplicity of a single panel hydraulic door compared to bifold and roller shutter doors changes face of agricultural buildings. With a Hydroswing®, (complete in its own frame, pre hung, ready to go “pillar to pillar” and right to the header), the wider you go, the better value it becomes. Safe and easy-to-use, the Hydroswing® provides almost zero in life service costs and therefore a guaranteed return on your investment. 

 

When farmers, ranchers and biomass producers consider the potential for door replacement in their older buildings, more and more they are turning to the single panel hydraulic door solution. With internal personnel doors, wind loadings to cope with forces of 200 MPH and strength to keep valuable machinery locked in and secure, the Hydroswing® offers the most attractive and cost effective source in the marketplace today. (Financing made easier than ever through our new equipment leasing program. ) For tractor security, plant and machinery security, Hydroswing® is the only choice for farm, biomass fuel, industrial and grain storage building doors.

 

 The difference is clear to see in the photo above, where one of three buildings has had two roller shutter doors replaced by one efficient, single panel hydraulic door. This addition adds door size, value, and in some instances, may allow you to use old buildings in ways previously not thought possible without constructing a new building. Concentrating on what you do with your building or shed is more important to your bottom line than replacing a door every two or three years.


The Hydroswing® will not pop out of its rails, rust away, flap in the wind, or allow pigeons or other birds in via the roller. With 70% less moving parts than a bifold, the Hydroswing® seals all the way round its own frame, and if required for food regulations, can be made 100% rodent proof. 

 Add value, size and efficiency by replacing your warn out or dangerous bifold or roller shutter doors to your biomass fuel store, grain store or agricultural buildings with a Hydroswing®. Sustain your door for years to come. Buy or lease a Hydroswing today.

 

 

 

Efficiency in Agriculture - Hydraulic Doors Keeping Pace with Technology

17. December 2013 15:00 by Hydroswing in Agriculture, Farm Doors

There was a time when oxen and horses were used for power, basic wooden plows tilled the fields, all sowing was done by hand, cultivating was done by hoe, and hay and grain was cut with sickles. By 1837, John Deere and Leonard Andrus began manufacturing steel plows and a practical threshing machine was patented. The first gasoline tractor was built by John Froelich 1892 and the first commercially successful (gasoline-powered) general purpose tractor in was in production.

 

 

From 1920-1940, farm production made large strides. The use of mechanized power expanded and by the 50’s the number of tractors on farms finally exceeded the number horses and mules for the first time. The 60’s saw 96% of cotton harvested mechanically, and the 70’s and 80’s brought self-propelled combines, and more efficient equipment. By the 90’s, farmers were using satellite technology to track and plan their farming practices. The new millennium has advanced agricultural technology to an even further by introducing smart phones, tablets and portable computers to the cabs of tractors, trucks and combines. It’s a new world for farmers.

 

Over the past century, agriculture has been strongly influenced by enhanced mechanization, but even more so by how humans operate those machines. Though the fundamentals of agricultural machinery are basically the same, the technology, size, scope and capabilities have evolved dramatically. Keeping pace with the changes is how farmers “house” their equipment.  Over the last decade the single panel hydraulic agricultural door has become the “door of choice” for farmers across the country. Doors for agriculture machine sheds and doors for barns are transitioning from roller, slider and bi-fold doors towards the superior technology of the hydraulic door.

 

 

Strong and well sealed, the hydraulic door is easy to install on pole barns, post & frame buildings and pre engineered steel buildings. The Hydroswing® agricultural door can be found on thousands of farms across the country and is taking its place among the farming world’s technological advances.  Hydroswing hydraulic doors are also an easy way for farmers to enlarge existing openings in sheds and barns.

Door markets in the United States are keeping pace with modern technology and have started to move toward efficiency and “in life” service cost. Reduced pricing and quality workmanship are quickly making hydraulic doors one of the many advances that simplify and improve agriculture.