Everything you need to know about Hydraulic Doors for Aviation, Agriculture, Industrial & Architectural use

Total Cost of Ownership – A Hydroswing Door is the Best Long Term Investment for your Hangar

24. November 2015 10:00 by Hydroswing in Aviation , Commercial Doors, Hangar Doors

It’s time to think differently about the cost of your building, and the cost of your door. Statistics prove that for every $1 spent on purchasing for efficiency, the return will be $6 in energy savings — that equates to a 600% return on investment. Hydroswing® is only door investment that will bring that will make that fact a reality.  


So do you think a bifold is a “good value” for you money? WRONG. In reality, the bifold has the highest total cost of ownership of all hangar doors.  With a large number of moving parts, including straps, cables, motors, wires, limit switches, locks, chain, sprockets, carrier bearings, roller wheels, and more, there is a litany of service items.  Bottom line: the bifold is ONLY less expensive on the front end, but it’s a maintenance hog that requires cost upkeep, and ongoing monitoring of the door and the building. The main problem is that cables stretch over time, and straps can over torque if limit switches fail. Without quarterly servicing, high cycling doors will have a very short life span.

 

 The total cost of ownership (TCO) of your hangar or large door system should be evaluated in terms of the following: Total Cost New + Annual Service Costs + Life Span.

The cost of purchasing a bifold is just the “tip of the iceberg” in terms of expense.
An expense that is regularly overlooked is the impact cost of having to build a higher building to accommodate the “wedge” in the clear opening of the hangar to provide the required clear height. This bifold adjustment is (in many cases) 2 to 5 feet of extra all around linear height of building, not just at the door. Often builders need to uplift the whole linear height of the entire hangar.  Your value decision needs careful consideration. General contractors and building companies are becoming aware of the inefficiencies and cost of the bifold and the door is being used less and less in their competitive bidding process.  

When calculating your TCO, choosing a hydraulic single panel door system reduces overall building height, maximizes opening height and width, reduces part counts by up to 95%, reduces servicing costs to almost zero, and delivers a door system which will last the full life of the building. It’s all about quality up front and life and durability of your door. To make a sound investment, avoid a non-engineered, unproven cable replacement offers from bifold manufacturers, call Hydroswing® to retrofit your hangar.  Don’t put a short term fix on a long term problem. The Hydroswing® hydraulic single panel door system is the most cost effective purchase for your hangar and the most bang for your buck on your TCO.  Get it right the first time. Be the King ... Fit a Hydroswing®… for life!

 

 Remember… If it doesn’t come from Hydroswing® — It’s not a Hydroswing®!

 

 

 

 

 

 

 

Top 10 Reasons to Replace your Old Hangar Door with a New Hydroswing Hydraulic Door System

22. July 2015 21:00 by Hydroswing in Aviation , Hangar Doors

At Hydroswing®, we know aviation. We understand aircraft, and we understand hangars. We take pride in meeting the needs of aircraft owners and facilities worldwide. Times are changing and the days of the bifold are almost over. By replacing aging, unserviceable and dangerous hangar doors, Hydroswing® brings the best to the marketplace. So why do you need a Hydroswing Hydraulic Door system on your hangar? 


10.) Broken (and dangerous) bifolds, torn fabric sliders, and inefficient rollers and stackers can cost more than they’re worth to repair.


9.) Chains, pulleys, straps and too many parts can invariably lead to a break down and possibly an accident where someone in your hangar may be injured or even killed. Our zero drop two-way Hydrolok system also assures the hangar door will never fall should there ever be a loss of power. No cables. No pulleys. No Straps.


8.) Hydroswing® door systems have 90% fewer moving parts than bifold doors.

 


7.) There is minimal load and reaction levels to existing hangar structures because Hydrowswing® is pre hung in its own frame. This allows for a simple removal of the old hangar door and in many cases, no additional structural work.


6.) Our customers quickly see the benefits of “going big,” maximizes the height to the eaves, and maximizes the size of the hangar to the largest width of the building frame or section.


5.) Cost effective, safe, and accommodating in sizes up to 150’(45.0 m) wide  X  40’(12.0 m) high, our Hydraulic Hangar Door system is being retrofitted in commercial aviation facilities, private airplane and helicopter hangars alike.

 

4.) The Hydroswing® hangar door system is operated by two dual-acting hydraulic rams powered by a single or three-phase motor and pump. This in itself provides an extra layer of safety because the Hydroswing® is impossible to operate without access to the control unit, making it far more secure than other types of doors.


3.) Custom cladding (which makes the hangar door match the thermal characteristics of the building) and 90 MPH wind rating standard.


2.) Affordability! Hydroswing® Hydraulic Hangar Door systems are available through our new door leasing program. (Visit www.hydroswing.com for details.)


1.) QUALITY. VALUE. STRENGTH. SIMPLICIY. Hydroswing® is the original and still the best hydraulic hangar door on the market today. 

 

Remember... If it doesn't come from Hydroswing®, it's not a Hydroswing®!

 

 

All Hydro and Half the Swing - Hydroswing Launches a NEW Dual Panel Hydraulic Door

The Hydroswing® Single Panel hydraulic door system is known worldwide for quality and strength. As an industry leader, Hydroswing listened to potential customers who didn't have the room for a “swing out” door system and designed the perfect alternative. Hydroswing has designed a multi-hydraulic Dual Panel door without dangerous cables and straps. Hydroswing® is proud to introduce the revolutionary, but simple, Hydroswing® Dual Panel Door System. “We designed this door primarily for the architectural market,” says Marshal Parker, owner of Hydroswing®. “Swing out space is a concern for some of our customers. For the aviation sector (because of the dynamics and layout of some hangars), it is important to save the space on the taxiway, even at the cost of a little headroom. With over 7,000 single panel door systems now in use around the world, the Dual Panel Hydraulic Door System is an option now as well,” says Parker.

 

This impressive new Dual Panel Hydraulic Door System has all the same Hydroswing® credentials, just half the swing out. All Hydroswing® are supplied “pre hung” in their own tube steel framework for ease of onsite assembly and installation. Like the Hydroswing® Single Panel hydraulic door system, the Dual Panel is supplied with touch-of-a-button opening and closing with excellent sealing and security (as it locks closed through the hydraulic system). Also like the Single Panel, the Hydroswing® Dual Panel Door System can be integrated or retrofitted to any existing building.

 

Both the Hydroswing® Single Panel and Dual Panel hydraulic door systems are useful for an increasingly robust architectural market. Hydroswing® is providing this solution in a horizontal format for several transport industry leaders via new HydroTop truck products (launching in the US in Fall/Winter 2015). With several ISO 9001 fabrication locations in USA, Mexico and Europe, Hydroswing® delivers the most innovative hydraulic Single Panel and Dual Panel doors and wall systems in the world for every use and every sector.

Remember... If it doesn't come from Hydroswing®... It's not a Hydroswing®.