Everything you need to know about Hydraulic Doors for Aviation, Agriculture, Industrial & Architectural use

Total Cost of Ownership – A Hydroswing Door is the Best Long Term Investment for your Hangar

24. November 2015 10:00 by Hydroswing in Aviation , Commercial Doors, Hangar Doors

It’s time to think differently about the cost of your building, and the cost of your door. Statistics prove that for every $1 spent on purchasing for efficiency, the return will be $6 in energy savings — that equates to a 600% return on investment. Hydroswing® is only door investment that will bring that will make that fact a reality.  


So do you think a bifold is a “good value” for you money? WRONG. In reality, the bifold has the highest total cost of ownership of all hangar doors.  With a large number of moving parts, including straps, cables, motors, wires, limit switches, locks, chain, sprockets, carrier bearings, roller wheels, and more, there is a litany of service items.  Bottom line: the bifold is ONLY less expensive on the front end, but it’s a maintenance hog that requires cost upkeep, and ongoing monitoring of the door and the building. The main problem is that cables stretch over time, and straps can over torque if limit switches fail. Without quarterly servicing, high cycling doors will have a very short life span.

 

 The total cost of ownership (TCO) of your hangar or large door system should be evaluated in terms of the following: Total Cost New + Annual Service Costs + Life Span.

The cost of purchasing a bifold is just the “tip of the iceberg” in terms of expense.
An expense that is regularly overlooked is the impact cost of having to build a higher building to accommodate the “wedge” in the clear opening of the hangar to provide the required clear height. This bifold adjustment is (in many cases) 2 to 5 feet of extra all around linear height of building, not just at the door. Often builders need to uplift the whole linear height of the entire hangar.  Your value decision needs careful consideration. General contractors and building companies are becoming aware of the inefficiencies and cost of the bifold and the door is being used less and less in their competitive bidding process.  

When calculating your TCO, choosing a hydraulic single panel door system reduces overall building height, maximizes opening height and width, reduces part counts by up to 95%, reduces servicing costs to almost zero, and delivers a door system which will last the full life of the building. It’s all about quality up front and life and durability of your door. To make a sound investment, avoid a non-engineered, unproven cable replacement offers from bifold manufacturers, call Hydroswing® to retrofit your hangar.  Don’t put a short term fix on a long term problem. The Hydroswing® hydraulic single panel door system is the most cost effective purchase for your hangar and the most bang for your buck on your TCO.  Get it right the first time. Be the King ... Fit a Hydroswing®… for life!

 

 Remember… If it doesn’t come from Hydroswing® — It’s not a Hydroswing®!

 

 

 

 

 

 

 

Hydroswing’s Big Doors – Manufacturing Masterpieces


Until Hydroswing, it was hardly conceivable to think of a hydraulic door larger than 100’ (30m), but times they are a changing!  Hydroswing is ramping up the pace and manufacturing and selling big door after big door… up to 150’ (45m) wide and 40’ (12m) tall! Hydroswing® has broken the size barrier and is charging into the large commercial door and industrial door market. 

These gigantic manufacturing masterpieces are creating a revolution in terms of construction possibilities. Total simplicity, sheer strength, ease of use and reduction in moving parts, plus the use of specialty cladding (which makes the door match the thermal characteristics of the building) are among the top reasons customers are looking to Hydroswing® for their big door needs. The sophistication of large single panel hydraulic doors is now part of everyday door use across every sector. In addition to new doors on new buildings, we are also retrofitting gigantic openings and moving walls. With Hydroswing®, very large walls can be converted into useful and cost effective hydraulic doors. With almost 100% seal-ability, this conversion will forever change the face of commercial and industrial structures around the world.

 

 Before the option of Hydroswing’s large and extra-large singe panel hydraulic doors, openings were restricted. Structures with massive needs had to rely on steel rolling doors or sectional applications. The option of a single panel hydraulic door changed everything. The huge opening capacity, teamed with expanded vertical clearance and an almost air-tight seal, the door essentially becomes another wall. In turn, the enhanced building efficiency reduces both costs across the board.  

Hydroswing® is synonymous with quality. From the beginning, our standards have been the highest in the industry.  All Hydroswing® doors are fabricated in ISO 9001 facilities that adhere to the American Welding Society (AWS) D1.1 code requirements for welding of structural steel. Unlike other manufacturers, we understand the importance of working within specific codes and with vendors who boast an ISO certification.

 

Hydroswing® is overcoming space and size hurdles in the commercial and industrial sectors at a rapid pace. New projects in the works include a “door within a door” allowing for a smaller single panel installation within the confines of a 150’ (45m) main door allowing a wide array of multi-use possibilities. Hydroswing® is single handedly changing the way people use doors in commercial and industrial settings. Our ability to design and create solutions for large industrial doors and large commercial doors will leave a lasting impact on productivity, efficiency and cost effectiveness for any buyer.