Everything you need to know about Hydraulic Doors for Aviation, Agriculture, Industrial & Architectural use

Need a Hydraulic Door Part?

Hydroswing® innovates again! The new Hydraulic Door “Parts Store” is rolling!  Our years of experience in the world of Hydraulic doors has taught us a thing or two, mainly how difficult it is to get a hold of spare parts. The initial “fleet” of single panel hydraulic doors produced by Hydroswing® is beginning to mature, so it made sense to create a source for the naturally aging parts. Our new Hydraulic Door Parts Store is not only a one-stop-shop for ALL your Hydroswing® hangar and shop door needs, but we can also source and upgrade parts for other doors on the market. 

 

We have crafted the Hydraulic Door Parts Store to serve as an online resource for worn seals, weather strips, motors, controls, hoses and connectors. We have also created an opportunity (subject to certain required information) to allow our “early adopters” to buy latest generation upgrades. This allows customers to continue to enjoy their perfectly good Hydroswing® doors but with the benefit of updated generation cylinders with integral, zero drop Hydroloks, a new Push Button Station and Remote, or a new weather seal that may be in need of replacement.

 

The Parts Store is one-stop-shopping for anyone in need of any part for any hydraulic door. Our troubleshooting guide will help you determine what you may need for your door. We have everything from O-rings for old rams, to kits that service cylinders. You’ll also find replacement hinges, pin points, spherical bearings, seals and weather-proofing to hard and soft lines, hydraulic couplings, and complete pumps and motors, and more.

 


With over 7,000 Hydroswing® door systems in use worldwide, we know our parts. Our unique hydraulic door Parts Store will even offer “green” hydraulic fluid for use in areas with specialty environmental controls. Hydroswing® will continue to change the face of the door industry bringing hydraulic technologies and parts to customers worldwide. Visit the Parts Store today for all your Hydraulic Door Part needs. www.hydraulicdoorparts.com

 

 

 

 

How’s it Hanging... Hydroswing’s Detailed Mounting Protocols Show How it’s Done

Simple, strong, secure… that’s our motto at Hydroswing®. Whether it’s retrofit or a new build, we are dedicated to having the easiest and most efficient process in the industry. If you need a hydraulic door, not only will we customize it for your space, we make sure you know how it works. Our “Mounting Protocols” demonstrate to all door owners the intricate details of how the door can be hung. We offer illustrations of everything from product attachments and positions of the door for installation, to the anatomy of the Hydroswing® door and full descriptions of different types of headers. 

 

Customization is one of our most important selling points so it’s critical that our customers know our “attach angle” can be made to mount our door to metal girders, concrete, block or wood buildings. Then the door will be bolted or welded in place per the protocols. (We don’t supply the headers or door pillars, but we do survey large doors and will engineer flanges to brace the existing door pillars and the Hydroswing® door jamb.)

 

Also key for most Hydroswing® door owners is “how” the door will be mounted. Our protocols detail three ways: Inside or Flush Mounting (where the door inside the building header and jamb making it flush with the face of the building), Outside Mounting (which is common in existing buildings and the door will fit against the face of the building) and Rear Mounting (this would connect the door to the rear of your building).

 

 

 Whatever your questions, we have the answers and our downloadable protocols will guide the way. Simplicity, strength, ease of use and reduction in moving parts, plus use of cladding (which makes the door match the thermal characteristics of the building) are among the top reasons customers are making the switch to Hydroswing®. The sophistication of our single panel hydraulic door system is now part of everyday door use for facilities large and small across the U.S. and around the world. The Hydroswing® single panel door system is like no other. Through the implementation of the Hydroswing® we lead to new efficiencies in building and wall designs. Remember, if it doesn’t come from Hydroswing®, it’s not a Hydroswing®.

 

 

 

 

 

 

 

 

 

 

 

All Hydro and Half the Swing - Hydroswing Launches a NEW Dual Panel Hydraulic Door

The Hydroswing® Single Panel hydraulic door system is known worldwide for quality and strength. As an industry leader, Hydroswing listened to potential customers who didn't have the room for a “swing out” door system and designed the perfect alternative. Hydroswing has designed a multi-hydraulic Dual Panel door without dangerous cables and straps. Hydroswing® is proud to introduce the revolutionary, but simple, Hydroswing® Dual Panel Door System. “We designed this door primarily for the architectural market,” says Marshal Parker, owner of Hydroswing®. “Swing out space is a concern for some of our customers. For the aviation sector (because of the dynamics and layout of some hangars), it is important to save the space on the taxiway, even at the cost of a little headroom. With over 7,000 single panel door systems now in use around the world, the Dual Panel Hydraulic Door System is an option now as well,” says Parker.

 

This impressive new Dual Panel Hydraulic Door System has all the same Hydroswing® credentials, just half the swing out. All Hydroswing® are supplied “pre hung” in their own tube steel framework for ease of onsite assembly and installation. Like the Hydroswing® Single Panel hydraulic door system, the Dual Panel is supplied with touch-of-a-button opening and closing with excellent sealing and security (as it locks closed through the hydraulic system). Also like the Single Panel, the Hydroswing® Dual Panel Door System can be integrated or retrofitted to any existing building.

 

Both the Hydroswing® Single Panel and Dual Panel hydraulic door systems are useful for an increasingly robust architectural market. Hydroswing® is providing this solution in a horizontal format for several transport industry leaders via new HydroTop truck products (launching in the US in Fall/Winter 2015). With several ISO 9001 fabrication locations in USA, Mexico and Europe, Hydroswing® delivers the most innovative hydraulic Single Panel and Dual Panel doors and wall systems in the world for every use and every sector.

Remember... If it doesn't come from Hydroswing®... It's not a Hydroswing®.

 

 

At Hydroswing … Our Specifications do the Talking

The Hydroswing® detailed spec sheet is here!  For our customers, seeing is believing and knowledge is power… and we know hydraulic doors. Our hydraulic door spec sheets are designed to summarize the technical characteristics and performance of the Hydroswing hydraulic door system. 

 

The Hydroswing technical specification document provides clearly defined detail to be used by a design engineers, architects, builders, contractors, or any door owner (or potential door owner) to understand all the components of the Hydroswing hydraulic door system. Hydraulics are the foundation of the future. The simplicity of liquid fluid power moving heavy objects is a solution that fits into all sectors of building and manufacturing. Hydroswing is the original and still the best hydraulic door on the market and we have a profound understanding of what it takes to create an extraordinary product.

Our specs include:
• Product overview
• Product features
• Steel frame schematic 
• Standard and basic attachment details
• Wiring and circuit diagram
• Electrical systems options
• Hydraulic circuit diagram
• Hydraulic cylinder schematic
• Available options (which include, a CCTV camera to monitor outside of the door prior to opening, an audible warning alarm to operate while the door is in motion, a visual (flashing light) warning signal to operate while the door is in motion, motion detectors on the sides of door to stop door if activated by personnel or a vehicle, hand pump for manual operation, cane bolts to lock the door to the floor on the inside, personnel door within the main door, and more.)

 

A fundamental feature of any hydraulic system is the ability to apply force or torque multiplication in an easy way, independent of the distance between the input and output, without the need for mechanical gears or levers. This concept, used in large machinery worldwide for decades, is demonstrated in detail in our specs, and is at the core of the Hydroswing hydraulic door system.

Simplicity, safety, strength, ease of use and reduction in moving parts, plus use of cladding (which makes the door match the thermal characteristics of the building) make Hydroswing® the hydraulic door system of choice. The sophistication of single panel hydraulic door system is now part of everyday door use for facilities large and small across the U.S. and around the world.

Click here to see our specs for the USA.
Click here to see our specs for the UK, Europe and the rest of the world.

 

 Remember, if it doesn’t come from Hydroswing®… It’s not a Hydroswing®

 

 

 

 

Hydroswing – Manufactured for Strength, Safety and Security

It’s about quality… At Hydroswing® we build hydraulic doors right. As the original and still the best single panel hydraulic door system on the market, Hydroswing® understands door manufacturing at a core level. Cost effective, safe, and accommodating in sizes up to 150’(45.0 m) wide X 40’(12.0 m) high, our hydraulic door system is being retrofitted in everything from commercial aviation facilities and private airplane and helicopter hangars to barns, agricultural centers, sheds and machine shops.

 

 It’s about the build… Our single panel hydraulic doors are fabricated and welded to ISO 9001 and American Welding Society D1.1 certifications and each is stringently audited for strength and quality assurance. Unlike other manufacturers, we understand the importance of working within specific codes and only with vendors who boast an ISO certification. ISO (International Organization for Standardization) is the largest developer in the world of voluntary International Standards. The Hydroswing is always pre hung in its own frame of the highest grade ASTM 275 tube steel.

 

It’s about strength…  No matter where you are in the world, you need to know your hydraulic door system can tolerate the elements. Hydroswing doors can withstand up to 200 MPH wind loading. We also shot blast prior to painting. This ensures the perfect base for the application of Carboline Carboguard 890, a highly chemical-resistant epoxy mastic coating that adds 50% greater corrosion resistance than any other hydraulic door offered in this category. Shot blasting allows an added layer of inspection of the steel for rare imperfections which remain unseen in non-shot blasted door systems.

 It’s about safety… The Hydroswing® is operated by two dual-acting hydraulic rams powered by a single or three-phase motor and pump, and all of our electrical controls are UL Certified. This in itself provides an extra layer of safety because the Hydrowswing® is impossible to operate without access to the control unit, making it far more secure than other types of doors.

 

 Hydroswing hydraulic door systems are the strongest, safest and most secure doors on the market. Remember, if it doesn’t come from Hydroswing, it’s not a Hydroswing.

 

 

 

 

 

 

 

Hydroswing Selected as the Provider of Hydraulic Doors for up to 200 Hangars at the San Diego Metropolitan Air Park (Brown Field)

Big News!  Hydroswing® North America, Inc., the world leader in single panel hydraulic door systems, is pleased to announce the company has been selected as the sole source of hangar doors for one of the most important aviation developments in the United States.

In 2013, the wheels went in motion when the San Diego City Council approved a redevelopment of Brown Field Municipal Airport in Otay Mesa, involving more than $1 billion in planned improvements over the next 20 years. Metropolitan Airpark, a four-phase commercial development, will cover 331 acres of the city-owned, 880-acre facility near the U.S.-Mexico border. This development is poised to become a major commercial hub for strategic business partnerships between the U.S. and Mexico.

Over the next five years, the San Diego Metropolitan Air Park (Brown Field) will see the development of up to 200 hangars and mixed use industrial structures. Use of the Hydroswing® brand at this magnitude will be a milestone, with hangar doors ranging from Boeing BBJ (737) sizes to general aviation T hangars. These aviation-related installations along side the industrial Hydroswing® door systems will showcase Hydroswing’s emerging product range aimed at the industrial and commercial sectors.

 

Developer, Richard Sax, is no stranger to the large aviation door market and cites Hydroswing’s overwhelming appeal and efficiency, plus the much lower in-life servicing costs, as reasons for this significant selection. Hydroswing® fabricates its steel in Mexico to ISO 9001 and ASW D1.1 standards and acquires all UL and CE approved Hydraulics from its agile supply chain partner in Wisconsin. Sax states, “Hydroswing understands the importance of an international strategic business model. Their ability to work across the border drives the demand for the use of Hydroswing® doors at the facilities at Brown Field.” South-of-the-border manufacturing and the agile supply chain structure is improving business for countless American manufacturers across all sectors.

 

Marshal Parker of Hydroswing® comments, “We are excited to be the supply chain partner to this headline aviation project. For Hydroswing®, it represents a highly visible statement that one airport can experience the efficiency of our hangar door systems with exceptionally low service costs, high degrees of primary security, and an unprecedented life span of the product.” The opportunity for Hydroswing® has also allowed the developers to enhance overall building efficiencies and LEED ratings, highlighting the impact an efficient low part count large door system (with its almost 100% “sealability”) makes to these large modern structures.

Once again, Hydroswing® leads the way!

 

 

 

 

 

Hydroswing – Versatile by Design

Versatile is defined as “being capable of or adapted for many different uses.” Versatile can also be defined as Hydroswing®.  After years of research, innovation and progress, Hydroswing has swept the hydraulic door market. There is no limit to what we can do. The Hydroswing® door system adds strength where others cannot, adds reliability where others are unable, provides superior headroom, precision workmanship, strength and reliability when it counts. Our sizing selection offers options and versatility that other systems can’t and we hit the target 100% of the time.


The “Small” Hydroswing®


Our “small” Hydroswing® hydraulic door is considered any door under 35 feet (10.66m) in width. Our small doors have been widely used for T-hangars, box hangars and at small airparks. Also ideal for storage of all kinds, including farms and ranches, or the residential user.  Think custom garage, shed, workshop, small feed storage, movable walls and more.

 

 

The “Medium” Hydroswing®


Our “medium” Hydroswing® hydraulic door is considered any door that measures 35 feet (10.66m) to 65 feet (19.81m).  Ideal for airplane or helicopter hangars, machine shops, grain and feed storage, biomass, and more.

 

 

The “Large” Hydroswing®


Our “large” Hydroswing® hydraulic door is considered any door that measures 65 feet (19.81m) to 95 feet (28.95m). We are true specialists in the large and extra-large and XXL door markets. This is our most popular door for commercial aviation and specialty use. Think all areas of industry including mining, agriculture and aviation.

 

The “Extra Large” Hydroswing®


Our “extra-large” Hydroswing® hydraulic door is considered any door that measures 95 feet (28.95m) to 119 feet (36.27m). We manufacture a hydraulic door that is strong, efficient and tested for quality assurance. The Hydroswing® is being used around the world on commercial buildings, commercial aviation hangars, specialty and other industrial uses.

 

The “XXL” Hydroswing®


Our “XXL” jumbo Hydroswing® hydraulic door is considered any door that measures over 120 feet (36.57m). It takes a specific knowledge to manufacture a door of this magnitude and we are proud to have these doors in use worldwide.

 

The Hydroswing® single panel hydraulic door system delivers on all criteria – strength, adaptability, seal-ability, wind loading, and expanded headroom. Size is never an issue for Hydroswing and we do it all with 70% less moving parts than a traditional bifold door. We boast a higher degree of safety since our doors have no rails or pulleys. Hydroswing® is also 100% more secure than fabric and has been tested to 200 mph in wind load testing. Our doors our manufactured to ISO 9001/ American Welding Society D1.1 standards.

Any size, any place…Hydroswing® is THE large door system of choice around the world.

 

 

 

 

 

 

 

 

ISO 9001/ AWS D1.1 – Because Quality Matters

Hydroswing® is synonymous with quality. From the beginning, our standards have been the highest in the industry.  All Hydroswing® doors are fabricated in ISO 9001 facilities that adhere to the American Welding Society (AWS) D1.1 code requirements for welding of structural steel. Unlike other manufacturers, we understand the importance of working within specific codes and with vendors who boast an ISO certification. ISO (International Organization for Standardization) is the largest developer in the world of voluntary International Standards.  An independent and non-governmental membership organization at work in 165 countries, ISO began in London in 1946 with a goal to “facilitate the international coordination and unification of industrial standards.” Today, ISO has published over 19,500 International Standards covering almost all of manufacturing and technology.

 

 ISO 9001 is part of the ISO 9000 “family of quality management systems standards” designed to help manufacturers meet statutory and regulatory requirements related to a product.  A third party certification provides an “independent confirmation” that companies meet the requirements of ISO 9001. So what does the mean for Hydroswing® customers? It means we are confident in our selected vendors and we pass that quality to our end users.  The ISO 9001 facilities we work with have Quality Management Systems (QMS) in place and are stringently audited for welding and quality assurance. The hydraulic components are sourced centrally in the United States for further continuous quality and supply chain integrity.

 

At Hydroswing®, fabrication quality is just one area we set ourselves apart from others. Our welding is always to AWS D1.1 code which covers the requirements for “any type of welded structure made from the commonly used carbon and low-alloy constructional steels.”  Another example of our quality systems is our shot blasting pre-paint. This ensures the perfect base for the application of Carboline carboguard 890, a highly chemical-resistant epoxy mastic coating that adds 50% greater corrosion resistance than any other hydraulic door offered in this category. Shot blasting allows an added layer of inspection of the steel for rare imperfections which remain unseen in non shot blasted door systems.

 

 The quality control doesn't stop there!  Our patented Hydroswing® bow truss (US D584,831S) is unique in the industry and use only premium hydraulic lines, hoses and connectors. To make our standards complete, we also use only UL certified controls motors and pumps.  It’s all about quality. It’s Hydroswing. For more information about ISO and ISO 9001 certification, visit www.iso.org 

Hydroswing Then and Now – Always Raising the Bar Higher

 

 

Hydraulics are always evolving. Hydroswing® is always evolving. Back in the day, operators turned a crank to raise and lower cable lift dump trucks.  Enter hydraulics and the dynamics of the dump truck are transformed.  A horizontal hydraulic ram and lever simplified and changed an entire industry. And so it is with the Hydroswing® single panel hydraulic door.  It won’t be long before slider, roller and bifold doors go by the way of the cable lift dump truck. Door systems have been transformed by the power of hydraulics: simple and reliable solutions for any and every door problem.

 


Hydroswing® was born in agriculture. Farmers needed easy, reliable doors for sheds, barns and production facilities.  They didn’t want to worry about pulleys, straps and broken parts. The early Hydroswing® doors were medium (comparatively speaking) in size, yet always extremely efficient, and farmers believed and trusted the fluid power and simplicity of hydraulics. Hydroswing® was on the move.

 

1998 the first Hydroswing door.


The DNA of the modern day Hydroswing® was built in agriculture but quickly evolved to include all sectors. With over 7,000 sold to date in aviation, agriculture, industry and architectural market sectors, the future holds endless possibilities.  Technological advancements and cutting edge design have made Hydroswing® the industry leader.  Today’s Hydroswing® single panel hydraulic door replaces almost all door systems with strength, efficiency, value, aesthetics, reduced maintenance and versatility.        

 

2014 ISO 9001/AWS D1.1 compliant Hydroswing doors rolling out of the factory complete in their epoxy Carboline Primer 890 paint after shot blasting.


Over the years, as budgets around the world became leaner and with higher sensitivity to re-use and maintenance, Hydroswing® found a way to produce the same high quality doors at a lower price. In all critical environments, less moving parts usually means greater ease of use, less cost of ownership, lower in life service costs, ease of local repair in the event of failure, simplicity of understanding and ease of replacement of old and unserviceable former doors.


The Hydroswing® single panel door system, like no other on the market paves the way to expand and grow in a market which is late to change and react.  By changing the way new and existing buildings function via implementation of the Hydroswing® it will lead to new efficiencies in building and wall designs.

 

Airbus A380 paint booth. The cycle reliability of the Hydroswing system paid for itself in months.

 

Once produced only in the United States, Hydroswing® is now fully fabricated and engineered in ISO 9001 facilities worldwide. Evolution is a natural process, and Hydroswing is a natural selection for all your door needs from 10’ wide to 150’ wide and now up to 45’ tall.
 

 

 

 

 

 

 

 

The History of Hydraulics – Still Going Strong

The word “hydraulic” comes from the Greek ‘hydra’ which refers to water and ‘aulos’ which means pipes.  Science historians believe that hydraulics (in an extremely basic form) originated in the Greek civilization two millennia ago.  The mathematician, Archimedes, reasoned that “a floating or immersed body must be acted upon an upward force equal to weight of the liquid that it displaces.”

As time passed, science improved, technology was beginning to take shape and ways to effectively use hydraulic energy were being discovered.  It all began with how water physically behaved at rest or in motion, and evolved from how to generate power with water at the source, to how to generate power at different points of use. Soon, the concept of transmitting power by putting fluids under pressure changed the face of engineering.  

In the late 17th century, the study of using oil in hydraulics started to get some legs. French mathematician, Blaise Pascal, created at law in fluid mechanics stating “that pressure exerted anywhere in a confined incompressible fluid is transmitted equally in all directions throughout the fluid such that the pressure variations (initial differences) remain the same.” This became known as Pascal’s Law and created the fundamentals for the science of hydraulics.

 

Enter English inventor Joseph Bramah. Based on Pascal’s Law, Bramah invented the hydraulic press. His understanding of the relationship between force, pressure and area forever changed engineering and industry.  Bramah demonstrated that pressure throughout a closed system is constant and he was granted a patent for his product in 1795. By the time Britain’s industrial revolution hit in 1850, hydraulics were being used in a multitude of industries.  The twentieth century saw fluid power through hydraulic replacing electrical systems and the rest, as they say, is history.  


Greenham Common used hydraulic doors to seal in safety and seal out nuclear blast. Opened in 1942, it was used by both the Royal Air Force in WW II and most famously by the US Air Force as a major Cold War Nuclear Strike Base. From late 1967, Greenham Common was used for NATO operations in deterrence of the Eastern Block countries. The missile bunkers seen here were designed with their hydraulic doors to withstand the local airbursting of a point strike on the West’s front line deterrent from the East, showing the unique ability of the Hydraulic door system to carry strength and integrity to such a level… and they are still in existence today for all to see as part of the Cold War history.

 

Today, Hydroswing® is proud to be the pioneer in hydraulic doors. Our superior technology has allowed us to engineer single panel hydraulic doors that replace doors with mechanical and electrical drives.  We have taken hydraulic door systems to the next level and are changing the world one door at time. Don’t you want to be a part of our door revolution?