Everything you need to know about Hydraulic Doors for Aviation, Agriculture, Industrial & Architectural use

The “Sustainable” Single Panel Hydraulic Door System

Sustainable means “pertaining to a system that maintains its own viability by using techniques that allow for continual reuse.” By replacing bifold or roller shutter doors with a Hydroswing® single panel agricultural door on your equipment and/or process buildings, you will probably never have to replace the door again. Hydroswing® is a sustainable solution to all your door needs.


The simplicity of a single panel hydraulic door compared to bifold and roller shutter doors changes face of agricultural buildings. With a Hydroswing®, (complete in its own frame, pre hung, ready to go “pillar to pillar” and right to the header), the wider you go, the better value it becomes. Safe and easy-to-use, the Hydroswing® provides almost zero in life service costs and therefore a guaranteed return on your investment. 

 

When farmers, ranchers and biomass producers consider the potential for door replacement in their older buildings, more and more they are turning to the single panel hydraulic door solution. With internal personnel doors, wind loadings to cope with forces of 200 MPH and strength to keep valuable machinery locked in and secure, the Hydroswing® offers the most attractive and cost effective source in the marketplace today. (Financing made easier than ever through our new equipment leasing program. ) For tractor security, plant and machinery security, Hydroswing® is the only choice for farm, biomass fuel, industrial and grain storage building doors.

 

 The difference is clear to see in the photo above, where one of three buildings has had two roller shutter doors replaced by one efficient, single panel hydraulic door. This addition adds door size, value, and in some instances, may allow you to use old buildings in ways previously not thought possible without constructing a new building. Concentrating on what you do with your building or shed is more important to your bottom line than replacing a door every two or three years.


The Hydroswing® will not pop out of its rails, rust away, flap in the wind, or allow pigeons or other birds in via the roller. With 70% less moving parts than a bifold, the Hydroswing® seals all the way round its own frame, and if required for food regulations, can be made 100% rodent proof. 

 Add value, size and efficiency by replacing your warn out or dangerous bifold or roller shutter doors to your biomass fuel store, grain store or agricultural buildings with a Hydroswing®. Sustain your door for years to come. Buy or lease a Hydroswing today.

 

 

 

Stepping into the Future of Agriculture

15. May 2014 11:14 by Hydroswing in Agriculture, Farm Doors, General

A couple of centuries ago, 90% of the population in the United States lived on farms and produced food. Today, farmers who produce cereals, fruits, vegetables, meat and dairy, only make up 2% of the population and still provide to the masses. To keep up with this ever growing demand, agriculture has turned to modern machinery and technology. In 1940, the data shows that one farmer could feed 19 people. By 2010, that number had increased to 155 people. Changes in equipment, biotech breakthroughs for crop production, and modified barns and storage facilities have allowed for vast improvements throughout the industry.  

 The bottom line: Farms are growing in size because of increased efficiency, and hydraulic doors are playing a huge role. Hydroswing® is playing a huge role. It’s important for all farmers to keep their valuable machinery locked in and secure, and the Hydroswing® single panel hydraulic door is the best choice. The Hydroswing® is operated by two dual-acting hydraulic rams powered by a single or three-phase motor and pump. This in itself provides an extra layer of safety because the Hydrowswing® is impossible to operate without access to the control unit, making it far more secure than other types of doors. And, with almost 100% seal-ability, our door can be easily retrofitted to existing buildings or fitted to new builds for the ultimate in efficiency for all agricultural building or shop doors.

 

 What’s on your farm? Bi-folds? Roller doors? Sliders? Unlike those, the Hydroswing® will not pop out of its rails, rust away, flap in the wind, or allow birds to fly in via the gaps around the door slabs. The Hydroswing® seals all the way around its own frame and if required for food regulations, can be made 100% varmint/bird proof. With Hydroswing, there is freedom to “open end” or “open side” any building, providing unrestricted loading and maneuvering for composting, silage, grain storage, feed/transfer sheds/buildings and farm shops.  The overhead clearance also allows for multiple load discharge saving valuable supplier transport time between loads… all going straight to your bottom line and ROI on your investment in the Hydroswing® single panel hydraulic door system.

 

If you have special coverings/sheeting and sealing requirements, the simplicity and strength of a Hydroswing® allow you to have the door covered in the same as the walls maintaining insulation levels for better efficiency and cost effectiveness over cold winters.

 

Step into the future of efficiency with Hydroswing®. Our doors can be fitted to post and frame , pole barns, stick, steel (PEB), tensile, Quonset, brick and block structures with little or no alteration to an existing building for retro fit or total simplicity when designing your new building to receive the totally “pre hung” Hydroswing®.

 

 

 

 

 

Biomass and Renewable Energy – A Market on the Move

Biomass energy is a hot topic. With a consumption increase of over 60% from 2002 to 2013, it’s easy to see why this sector is growing at such a rapid rate. Biomass is defined as “biological material derived from living, or recently living organisms. Both plant and animal.” Even though wood is considered to be the most prolific source of biomass energy, agriculture is currently producing huge amounts of biomass residue that can be converted to energy.  In 2013, half of all the renewable energy consumed worldwide came from biomass, with the U.S. number coming in at 5%.  (That 5% is enough power to accommodate close to a half a million homes.) The U.K. and Europe are already on the fast track to successful biomass energy platforms, and it’s catching on across the globe. According to recent reports, the use of biomass for energy could change the face of agriculture and provide farmers in the U.S. alone up to $20 billion in new income.   

 

The goal is to convert crop residue, manure and other agricultural byproducts into renewable energy sources. As farmers are learning how to capture and store these resources, they are gaining new revenue streams by producing energy while reducing disposal costs. According to Ag Energy Solutions, farmers can profit from “manure, corn stalks, woody-brush, or even weeds and grasses. By utilizing more of the biological material that grows on the farm, farmers can gain more value from each acre. And because biomass is renewable, and it’s easy to replace harvested trees or crops; these energy-rich waste materials are sustainable indefinitely.”

 

In addition to large, industrial facilities, farmers are beginning to construct buildings (within the guidelines and regulations of their rural area) specifically designed to house biomass. These multifunctional structures are made to store and protect the contents from moisture while creating space to burn and/or transport the material to biomass processing plants.  And Hydroswing® is there too. Our single panel hydraulic doors offer almost complete seal-ability, and with the wide variety of size options, they are the right door at the right time in the right sector.  

 

A current article in Biomass Magazine stated the “USDA Farm Service Agency recently announced the expansion of its Farm Storage and Facility Loan program, which provides low-interest financing to producers. With regard to bioenergy, the loan program can provide low-interest funds to build or upgrade permanent facilities to store eligible commodities, including renewable biomass.” 

With the ability to retro fit to existing buildings or apply to new build, the Hydroswing® adds size, ease of use and value to the processes in the biomass and renewable sector and can easily withstand the rigors of waste and recycling.  Pre hung in its own frame, the Hydroswing® can deliver zero load and reaction to the building is required to be fitted to a tensile or none structural building. Whether high cycling rates or long periods for seasonal storage and holding buildings, the Hydroswing® hydraulic door provides a greater array of working and process efficiencies than traditional sectional, overhead or roller doors with industry leading ROI.

The way we capture and use energy is changing.  The E.U. is already dedicated to the cause and has a goal of 20% of their energy being created by renewables by 2020. The U.S. is catching up and hopes to have 25% dedicated to the same faction by 2015. Hydroswing® remains on the cutting edge of all sectors of industry by providing a product that will easily adapt and play a role in existing facilities and new facilities that are being built to promote this commitment to new energy.